Mine was after the collector but before the muffler . kinda by where the foot peg is. a little forward of there.
I just bought a bung and welded it infuriated exhaust pipe where it wasn't sticking out and riged up quick clips for the + & - wires. got my...
i live in kansas city misouri so altitude shouldn't be to big of a deal. once i put the k&n in it should lean it out just a little but still be on...
deffinatly require the air box with snorkel at the very least. the carbs are bone stock right now with the 118 and 38 main and pilot jets and 2.5...
update: got it all back togeather with the carb cleaned up and stock jets installed. ran a few test runs. 1st airbox lid off no air...
DAMN!!!!!! well there goes that idea:frown:
i got a little lazy tonight and just went and blew compressed air through all the holes to make sure thier was no blockages then came inside to do...
nope. it had a very very very thin washer but it looked stock, just to keep the metal needal from contacting the plastic slide and wearing though....
it is a wide band oxygen sensor. it has a guage that reads out and tells you exactly where your fuel mixture is at....... rich or lean. 14.7 is...
forgot to mention that i am going to bring the compression tester home tomarrow and make sure the cylinders compression tests good. i am sure that...
welp done for the night. pulled the needles out and they look just like a nail so they are the stock ones. the thing that gets me is everything...
oh that would suck. i will see what i can do. my room mate is a little more carb savy when it comes to bikes so when he gets off work we will tear...
118 is the main. we just pulled the bowls off last night and used a flat head screw driver to pull the main and secondarys out to check the...
14.0 on a air fuel guage. i have a portable air fuel guage with a bung welded into the pipe. everything on the bike is stock as far as i know. me...
anyone????????????????????
i recently installed a wideband on my bike to help diagnose a hesitation problem above 8500. it idles at 14.0 and pegs below 10.0 when driving and...
86 700 vfr carb jet question sorry hit the wrong reply button
aftermarket. off of ebay. it works great. much bigger cooling fins than the stock one and i had to swap the connector end to keep the connector...
installed the new rectifier and it works like a charm.:thumbsup:
at 5000 -6000 rpms it has 80-90 volts ac from the stater. and with the engine off it ohms out to .1-.3 ohms. this all seems to point back to...
Separate names with a comma.
