Build your silencer... VFR800F 2014

Hello people
Since January I have the bike, I am fascinated by these:

http://i.imgur.com/dMP8HMZ.png

http://i.imgur.com/DraHjdE.jpg

http://imgur.com/xQQXYH1

I am working on the idea and on the metal, shortly the photos ...

 

Hi!
Here are the first results:

http://i.imgur.com/7vrM4Br.jpg
http://i.imgur.com/DOFFalA.jpg
http://i.imgur.com/sAywExX.jpg
http://i.imgur.com/at5InOE.jpg
http://i.imgur.com/pwjOFJW.jpg

A very, very short silencer, The rear wheel fully visible, but too much noise, And unbalanced aesthetics.
No problem, I create the 2nd version!

Note: everything you see, cones, bends, welds, is done with my hands.

regards!

 

Hi,
step two, So much the theory ...

http://i.imgur.com/3mFve53.jpg
http://imgur.com/nt5PZHu
http://i.imgur.com/LghF45f.jpg
http://i.imgur.com/JJaE5cw.jpg
http://i.imgur.com/LghF45f.jpg
http://i.imgur.com/otYllFy.jpg
http://i.imgur.com/rQNOO2H.jpg
http://i.imgur.com/yuoNgqp.jpg

 

I increased the silencer volume, I created a little bigger and longer cones, I created the base, oval, sheet metal (oval, to stay 2 cm from the wheel).
Result: A longer silencer in the direction of the engine. Sounds good, It does not make too much noise! ( The first was a plane )

http://i.imgur.com/EeBHyOp.jpg
http://i.imgur.com/LhptqEq.jpg

 

Now a bit of data: The total length (fitting and silencer) Is equal to that of the original silencer, (that's why all those outbound curves) the diameter of the line is 50 mm ext, The diameter of the dbkiller is 30 mm.

If you need more data, ask as well!

bye, see you soon

 

I'm impressed ....you have a black bike as well