Welcome to VFRworld.com! Log in or Sign up to interact with the community.

Another 1984 VF500F project

Discussion in '1st & 2nd Generation 1983-1989' started by rcthirty, Mar 2, 2025.

  1. Captain 80s

    Captain 80s Member

    Country:
    United States
    Joined:
    Apr 25, 2009
    Messages:
    7,623
    Likes Received:
    3,703
    Were your other carbs also vented to the plenum (long, oval, gold colored plate in the center of your second pic) and not atmosphere? That's basically what I'm verifying, but I would also like to know their numbers.
     


    This site may contain affiliate links for which VFRworld may be compensated
  2. rcthirty

    rcthirty New Member

    Country:
    United States
    Joined:
    May 3, 2024
    Messages:
    157
    Likes Received:
    94
    You mean the gold colored throttle plates ? If so no, those carbs were replaced with throttle bodies with the silver plates. All are silver plate.
     


    This site may contain affiliate links for which VFRworld may be compensated
  3. Captain 80s

    Captain 80s Member

    Country:
    United States
    Joined:
    Apr 25, 2009
    Messages:
    7,623
    Likes Received:
    3,703
    No. In your second pic (post 116) looking down on the carbs in the center, 1 screw in it...

    "(long, oval, gold colored plate in the center of your second pic)"
     


    This site may contain affiliate links for which VFRworld may be compensated
  4. rcthirty

    rcthirty New Member

    Country:
    United States
    Joined:
    May 3, 2024
    Messages:
    157
    Likes Received:
    94
    Oh that plate. The original carbs were just like that. They had the plate. Only one carb was replaced and its the same.
     


    This site may contain affiliate links for which VFRworld may be compensated
    Captain 80s likes this.
  5. rcthirty

    rcthirty New Member

    Country:
    United States
    Joined:
    May 3, 2024
    Messages:
    157
    Likes Received:
    94
    On another note. I'm about to install the coils but the spark plug caps are pretty bad. Wires too. Anyone know of where to source replacement caps or wires ?
     


    This site may contain affiliate links for which VFRworld may be compensated
  6. Captain 80s

    Captain 80s Member

    Country:
    United States
    Joined:
    Apr 25, 2009
    Messages:
    7,623
    Likes Received:
    3,703
    I buy NGK caps and bulk NGK wire. But the wires are VERY resilient on Hondas. You can trim back about 1/8" and install new caps. The caps are available straight, bent and 90 degree.

    Usually eBay or Amazon for me after figuring what I want and a thorough search for a good deal.
     


    This site may contain affiliate links for which VFRworld may be compensated
Related Topics

Share This Page