Carburettor sync. - VFR750F, 1986

Discussion in '1st & 2nd Generation 1983-1989' started by Rune, May 14, 2019.

  1. Rune

    Rune New Member

    Country:
    Norway
    Joined:
    Dec 4, 2014
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    Hi there, Does anybody have some guidelines for carburettor synchronization, specific for the VFR750 year 1986? Info about the adapters needed etc? Br Rune
     
  2. hondaman219

    hondaman219 New Member

    Country:
    United States
    Joined:
    May 20, 2017
    Messages:
    158
    Likes Received:
    75
    Trophy Points:
    28
    Location:
    maine usa
    Map
  3. Rune

    Rune New Member

    Country:
    Norway
    Joined:
    Dec 4, 2014
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    Many thanks for quick respond and info from that website.

    About the tools...
    Do you have some information about the vacuum line adaptors for each carb and special tool for adjustment screws?
    The manometer gauges is ok.
     
  4. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    9,838
    Likes Received:
    743
    Trophy Points:
    128
    Location:
    Buffalo, NY
    Map
    you'll need a glove if you're reaching into the hot V to twiddle screws. if the bike runs OK, you won't need to (and don't) turn any screw more than about 1/16 turn or even less. sequence is VERY all-important. be sure to blip the throttle a couple times after any screw turn to let the adjustment settle in.
     
    Last edited by a moderator: May 16, 2019

Share This Page