NO,i WAS ACTUALLY WEARING THIS Z/AT NATIONAL RECORD HOLDER No, Left the boots and dress at home:biggrin:
slip ons i had a set of yoshimura slip ons on my 84 ,may be a hard find now
If it gives you piece of mind go ahead,I am going to do a vfr750 motor swap for my bike,have the same decision to make,but i know i will feel...
redo the # 3 cyl again,loo at the valve seats and valve seats for pitting.you may have to cut the seats or replace the valves.
Just got back from my first shakedown run after rebuilding . The bike had been the victim of a garage fire when a charger was left on a v max too...
86 vfr 700 99% [ATTACH] 87 vfr700
fastener looking for the same part, 64507-ML7-000 fastener ,anyone willing to part with one? thanks , Gary
cams The 750 cams are different than the 700,,You would have to send your cams out to have them redone,they would weld them and then grind a new...
dyno numbers I would like to see the numbers too.reality is that the 750 will walk away from the 700.just like to know how much it takes to do...
Respect all your opinions There is a noticeable difference between between the 700 and 750. When honda set the 24 hour endurance record that was...
found the information at VFR700F Specs
vfr 700,94 hp at crank.Now the numbers make more sense.:crazy: thanks for the input, gary
the 700 i am just now finishing putting together ,got it in a trade out for some work on a busa,thought i would put it together for sentimental...
vfr 750 rated at105 hp vfr700 rated at 76hp. that is a lot between the two. IS one rated at the crank and one the rear wheel. I have 86 700...
looks great Looks Great ,where did you get the carbon fiber?
Yes ,I agree,Using the tool would cause the valves to be too tight, as was found when the valves were checked,i only used the tool to verify cam...
I worked for dealership in the mid 80s when these first came out,was not uncommon to replace tensioners under warranty.This was a common...
Separate names with a comma.
