I better check my suggestions. I've never done business with them myself, just knew they have a nice web site. It's unfortunate there is nothing...
Old bike barn float valve and seat for 12$ Honda Float Valves - Needle and Seat
I used a rubber washer from a plumbing part. I enlarged the inner hole and made notches in it for the overflow to still work. Washer is 1mm thick....
I tried to fix one by removing the rubber but I have not been able to do it without damaging it (vf1000fe). It is important that the part snapped...
Derstuka is heading you in the right direction. It is disappointing to see that the melting R/R connector of the first gen are still there a...
The extra holes in your rotors are most likely to fit the ABS ring of the 6th gen. I faced the same dilemma this winter on my 5th gen. I...
vf500 forks on eBay Front Forks + Brace VF500 Honda Interceptor V30 35mm : eBay Motors (item 200450338850 end time Mar-21-10 15:33:53 PDT)
The real test is the dial indicator on the fork tube in v-blocks. A rustic method is rolling it on a plane surface (glass table for example)....
If forks are not bent nor rusted, it's a deal for you (I assume you pay no shipping for it). If all the electrical/electronic is there too (Pulse...
Bent forks, ahhhhhhhhhhhh!!!!! Your challenge will be reinstalling the wheel and get the proper clearance between the rotor and the caliper...
Have 2 vf1000fe, one stock and one modified, plus one 5th gen. Up to now, they have never been on the road at the same time but this should...
The symptom you describes are those I had on a 84. When hot it was loosing what looks as half it power. In fact it was running on 2 cylinders....
Bienvenue André, A V4 fan? Do you still have the Yam RZ of your avatar? We are at least 2 from Montréal and I am sure there are others.
Send it to me, I'll unlock it :-) Kidding, as captb said, depressing the rubber should bring the key (rotation) in the "get out" position. Where...
I have a Corbin seat I never used with a back rest. If I remember well, it has a small cut (1/4 inch) almost invisible, otherwise it is perfect....
The valves probably have debris in them and no longer do their job (stuck opened for compression and closed for rebound). I have a vfr800/A '04...
This is one of the rare error in the shop manual, copied in the clymer. I encountered the same problem on a vf1000f too and according to Jamie,...
Thanks for the info. I will first sort the heads and cams then look for an oiling kit. duB
vfrcapn, just wrote an introduction and rides description (and stop Donald's thread hijack :-)...
After some reading and posting, time to introduce myself (and my rides). This site is wonderful. I though it was mainly for recent VFRs but would...
Separate names with a comma.
