I was on the wrong valves in that pic, when I looked at the diagram originally I misunderstood it. Anyways I went through my non vtec valves only,...
I've almost felt that nothing makes a difference. Doing the idle valves, and screwing with different things during this journey, nothing has...
So, I tonight I checked the cams and they were correct, and I checked the clearances on the non vtec valves. Three of the exhaust valves were...
Nvm, I was looking at the diagram wrong, I was checking the wrong valves Sent from my iPhone using Tapatalk
Alright timing is at t1 mark, feeler is at .178 which is the bottom of spec. I can't get it in. I have checked every valve and not one of them...
Haha knight you are everywhere. I'll be checking for cam alignment tonight/tomorrow but while I've got the valve covers off i should check the...
Im having low end issues and members have said to check the valves, ive watched the video and read the shop manual. From what im gathering on an...
Its been a roller-coaster spanning many things. Here is the thread, but in a nutshell cold start is really rough, at about 1000-900rpm, once its...
Ive been defeated trying to troubleshoot my bike, anyone out there local to Indy thats able and willing to come take a stab at it? Case of beer or...
Its always not been right, but its gotten worse since Ive had it (I feel). If timing was off a tooth, then i would expect it to run like shit at...
More testing, went through a leak down test, and according to the manual if you have over 1.5 ohm then you have a short. Well, I had over 2ohm...
We checked it last week at the ECM and cold (68 deg f) it had the correct ohm reading per the manual. What I didn't do at the time was check the...
Ran more tests over yesterday, Something that i figured out, and was repeatable was that when the bike is at between 105-110deg it runs like a...
Got the new manifold installed with the new injectors and fpr, still having what seems to be the same issues. It was suppose to have come from a...
Welp, I just went for a Hail Mary, called a seller on ebay and spoke to him about a full throttle body assembly with injectors and FRP off of an...
I broke down and called a dealer to see if they could just do diagnostics for me, but they are a month out. So that's out of the question. There...
Alright, so I went through and tested tons of stuff. Here is a list of the things I have done to this point and what I think I know. At Idle...
I actually did that last night, didn't make a difference. It was previously running the mozie? Map as well as the PC map for the exhaust I'm...
Take a look at this spark plug, I'm guessing it's not a vacuum leak with this much fouling on the plug. I changed these last year and the old ones...
It'll be a couple of days till I can check the timing chain marks. If I go ahead on the assumption that its not a vacuum leak, since creating a...
Separate names with a comma.
