Check for leaks on the oil cooler behind the HEADlight. As far as the evap canister it sounds like it is correct. The left top nippple is open to...
Cool, glad to hear got got it running! I was about to pm you and see how things were coming with it. Thanks for letting us all know what the fix was!
Pssshhh Aaaa Let me know when you start to scrape the passenger pegs!! :flip: :pisser: Congrats man! Just keep the rubber side down.
I've said it before and I'll say it again! Has the wiring recall been done??? If you don't know know then call the dealership with your vin and...
I just installed the BrakeAway on my 6th gen and didn't need to make the chain link looking piece. I'll try to take a picture of it tomarow and...
You said that you "shorted" the side stand switch (assuming so the computer thinks the side stand is up) But doesn't the side stand have to be...
I think you need to stick with the 2.5" long filter. You might be able to jam a longer one in but if you prefill your filters with oil (and you...
That was the fakest thing I've seen ....in the last 30 min.
-------->These prices are way off from current pricing<-------- These Oil Filters have 20 x 1.5mm threads, 14 psi by-pass valve, anti-drain...
I don't know for sure but it would have to. That may be what the open to outside air port on the evap canister is for.
Here is a very bad pic... Page 1-44 of the honda manual [ATTACH]
That's the flux capacitor! Sorry. It's really the charcoal canister. It basicly takes gas fumes from the tank and then injects them into the...
Cool, glad you got it sorted. Especialy without having to buy replacement parts. Can't beat that!
Mine does the same thing. Worn out chain, brand new chain and sprockets, loose chain, tight chain - it makes the same clunking noise jumping chain...
Pull the left fairing. Start the bike and then move the blue and grey connectors around. if the bike dies then there you go! Could also be the...
Sounds like the brushes are worn out. Making enough contact to spin the starter but not so much when under load.
Oh, hey. I didn't realize that you are in OKC. You should post your location on the map. If after you install the ignition switch it still doesn't...
Separate names with a comma.
