Such a nice stance; love it.
Mmmmm Kriek Boon...love a good cherry beer. Goes down a treat with mussels and frites! Welcome Timmy.
Brilliant! Glad you got that sorted.
I might be wrong about the warning light then; I know earlier Japanese market bikes like the VF750 and VF400 had a warning light (at an annoying...
Those front teardrop indicators, the fluid reservoirs on the bars and the warning label under the seat, definitely look like a Japanese domestic...
The funniest (for me) bird strike happened to my best riding buddy, as I followed him while he rode his GPz900. He suddenly stopped and wbbbled to...
My ST1300 took out a blackbird, (the meaty one, not the XX) last week and I had to wash the blood off the fairing and pull feathers out of the air...
Steering bearings need to be carefully adjusted to find the "sweet spot" between too tight and binding, and too loose and rattly. The adjuster nut...
Make sure that you have the washer with the hose guide in place on the pinch bolt. If the washer is missing, the bolt is long enough to bottom out...
I don't have your bike or stand, but you should direct most effort into stepping on the lever arm on the stand (wear sturdy shoes). The lifting...
Changing the steering bearings is definitely in the DIY category. You need either the proper bearing press tools or great care with a hammer and...
Lovely 1000's Mike! How does the R compare to the F?
So it sounds like you wnt to accomplish 3 things: 1. Lower the bars 2. Improve the suspension and 3. Ditch the linked brakes I can't really...
As I understand it, the U-shaped tube you are referring to is the fuel return line from the fuel pressure regulator. This directs fuel back at the...
The brown/black wire should reach to earth through the ECM if it is trying to power the pump, so assume you'll get 3 seconds continuitiy to earth...
Not sure on the expected fuel pressure with the vacuum hose connected but the purpose of the FPR is to keep the fuel rail pressure constant with...
No experience of this with a Honda but 2nd gear is pretty weak on many Suzuki 4-cylinder bikes from the 90's. My RF900 started skipping out of 2nd...
The purpose of the one-way valve is to use intake vacuum to charge the vacuum chamber on the front of the airbox, and then the ECM opens and...
If the wires got hot and the pump did not run when you did a direct 12V connection to the pump, it sounds most likely the pump has seized. [ATTACH]
I assume you are referring to the front forks? The service manual refers to using ATF (automatic transmission fluid) with 332mL right and 335mL left.
Separate names with a comma.
