The H4's will fit, you just need to bend the two lower tabs 90 degrees, and you're all set. Robert
I average about 35mpg, a lot of my driving is in town, stop and go. Robert
Rollin, I'm sure you know that Air Tech has come out with replacement fairings for the 90 - 93 VFR. Sorry you lost your 93. FWIW I'd sell...
Two Brothers use to make one (I've got two, ones a spare just incase), the only draw back is the loss of the center stand, but for me it was worth...
One of my favorite cleaners is lacquer thinner, it's a great solvent, but I'd treat the seat with a leather polish afterwards. Robert
Timbersnake, my 93 does the same thing, I'm about to rebuild the master cylinder, I'll up date you if this fixes it. Robert
If you use the crank from a V-Max, connecting rods from a Honda S-2000, and the cylinder heads from an RZ-500, that might work.... What were we...
On my 1993 VFR the seat cowl fits just fine over my Corbin seat, FWIW. Robert
I'd take a picture of the two together, and just use the 'new' one. This way if you do sell it you can show the new owner what you've done. I've...
Can't you use the nitrogen in the tire to make a DIY NOS kit? With out a bottle, no one will suspect it.:thumbsup: I just havent worked out...
When my r/r went last year, it took out both low beam lights too, the highs were still good. Sounds like a r/r. too me. Robert
Okay, I lied, the right bottom mount to the factory exhaust and to the center stand. The center stand goes into the two large holes, and the...
Here's a pix of what I did. I thought it would be to much work to fab up the brackets, but I prefer it w/o the extra fairings. I still have...
Now all they need are a couple YSR 50's, and let the good times roll.
I do the same thing as Relic Rider, I use my engine hoist if I need both wheels off the ground. For the back wheel, you can put a set of jack...
I used the Silver Star 65/55w bulbs, but there not yellow, but any H-3 bulb should work, just bend the two tabs 90 degrees. Robert
Yes, the two holes on the frame, is where the bracket goes. I put plastic plugs in all the holes, you can get them at any auto parts store, there...
I'm in the process of swapping an entire F3 front end on my 93 VFR. I'm gonna post pix while I'm doing it, I'll also post pix before, during and...
I have a set that I got from Two Bros, that are great, nice and sturdy. FWIW Robret
94.1 rwhp, Two Bros full exhaust with insulating wrap, K&N air filter with entire air box wrapped with insulation, jetting that I worked on for a...
Separate names with a comma.
