Well, I would suggest a hub swap to get the 5 bolt. I don't know if that will ease the transistion or not, depends on the carrier and bearing,...
5 bolt vs 4? lots of work to do this, i would believe. Larry
Head bearings? Shock condition? Standard or different (front or back) heights? I find adding about 3/4" to the rear enhances cornering feel,...
Speaking of bias, 3rd gen in white. As far as the VF1000R, 1986 is the one. Comments, ergos suck unless you're about 6'. Long torso reach to pegs...
OK, on the 3rd gen bars, Heli Bars are clamp on, Gen Mars are spacers, and Spiegler (?) are super bike bars with the upper triple drilled and bar...
My way. Cut wire going to power to circuit horn and used it to activate relay to power accessory fuse block that is wired direct to battery with...
OK, you're in UK. In the US, the centerstand was optional on the 3rd gen, and standard on the 4th. On ebay you have exhaust by Black Widow and...
Well, most people do the opposite so they can run the sleeker 4th gen exhaust. But yes, it will bolt up. You MAY have some interference with the...
No, I Believe 90-91 is one shock, 92 another, and 93 another. Don't know the exact overall length of the 90, but I have an Ohlins I was using on...
I think only Honda mirrors (CBR1000) mirrors are bolt on, but they are not at the same angle. I did mount a set of Blackbird mirrors, with...
OK, I understand the angst. On my front end, I replaced the spring with a variable rate one from hyperpro on their recommendation, and rebuilt...
text me your number and I'll send one tomorrow. Larry
I have a NOS speedo in my garage, complete. Need it? Larry VFRrider 2 one 4- 2 eight nine- one fifty five 2
May I suggest 2000 or so Yamaha R1 forks. They own (owned) Ohlins and their production R1 forks are dam close, plus they're the right length and...
I would be happy with the Feds allowing the states to enforce the law, and punishing them if they don't. And personally, California politics...
Givi touring, MRA Vario Touring, favorites. Larry
The 90-93 had a small plastic fairing over the sidestand. Still available in the UK, non-existent in the US. I prefer the MRA touring windscreen....
Head ports are easily replaced with aluminum plate and gasket glue. Use original bolts, torque gently. And ditch those ugly rear head tubes....
A. Slice fender off level with rear plastic. I painted my inner fender color matched to bike for uniform look. My bike is white. B. Mount tag...
One more time, if you want a seat made for you, make it yourself and and get an upholstery shop to cover it for you. I bought the foam, shaped it...
Separate names with a comma.
