Yes it is. For things laying about, that you will probably never use, but may be helpful to another member. You may not want to go through the...
Was there one set up on this forum? I couldn't find one. Maybe I am mixed up with another forum. I was looking to add something to it. If there...
Sometimes just reseating a connector can clean a little surface corrosion off the pins to make it work again. That, or the problem could be in the...
The snow finally melted enough so that I could get into my shed. I have good news and bad news. I swapped the CDI into my bike, just to confirm...
I'm confused. Are those hammers, or torque wrenches? ARGH...
If you get silly on this trip, you'll have to raise the price on that footlong. :wink:
page 100 of user manual Rear wheel nuts torque: 103 N·m(10kg-m, 75 Ib-ft)
Another useful tip, besides the anti-seize, is to add another nut to the stud. This will protect the threads on the end of the stud from corroding.
The zeners and the other resistor are quite hardy and are probably fine. It wouldn't hurt to meter R2 to make sure that it's not open. I would be...
If you can still read the colour bands, just use google to figure out what the value is and replace it. It will be easier than getting them to pay...
Email sent
My manual sort of contradicts itself. Which only adds to the confusion. Mine states to have it on the side stand for the inspection and centre...
It may not have been, but I didn't think it would hurt to try. If it can save the next guy some time and trouble, then the forum has done it's...
:blue: It would be nice to know if it is detectable, or not. One would think that something should show up on the meter.
Good to hear. Did you ring them both out, so that we know what to look for, next time?
page 259 (16-6) of the service manual
Well, the fuse only blows when the pump is plugged in. It is a dead end in the cct, so the short has to be there somewhere between the relay and...
It looks like a big Hyde drift boat. I prefer to use a johnny, myself. If she wants to go fishing, I'll make room for her.
This snag would not blow the fuse, as the pump is constantly running when the engine is anyway. His problem was that the pump was not running....
Yes. It shouldn't hurt to try, as long as you're careful.
Separate names with a comma.
