Certainly a 6th gen so 2002. Was made in 2001 but not officially on sale till the launch in 2002. Id say yours was imported at a later date ,...
The other one is on the opposite side of the engine, i figured if one side is leaking the other side might start soon. As for miles 50k and going...
I had the exact same problem on mine last summer. The rubber o ring has perished causing the leak. Replace with a honda part as its an odd size....
It must be the hose not seating properly. Id pull it off and using some wire wool clean the stub really well and check inside the hose too for...
The drip is coming from under the water pump drain bolt, have you tightened it up with a new copper washer ?
Looks great but where would it plug in ?
Cant knock the price
Whats your thoughts on double bubble screens , good or crap ? My vfr 800 fi came with a bubble screen but i think its causing my noise problems. I...
You need to flush that grime out. Id get some cheap 10-40 w semi car oil and put it in with a new filter and just run it for 15mins then drain it...
Thats odd, not sure if thats right. Looks like theres some slack there. Your basket and the splines on the shaft look to be fine its the slack on...
You said you smelt burnt rubber ? The clutch doesnt contain rubber so must of been some crazy drunk driver smoking his tyres. We all get paranoid...
It would only help but i personally wouldnt bother.
If it aint broke, dont fix it.
It sounds like the basket is loose on the shaft. You need to get the nut undone and have a look. New basket easy fix , new shaft very bad.
A bit " out of the box " but a good fix. Get those starter valves synched if not already done and its a job done
Not sure about the slinky glide cables as ive not had a reason to use them but can vouch for Wemoto , a great company to deal with. Great...
Not my model but isnt there a hole where the bulbs fit ?
It should look like this but yours has broken off. Im afraid you need another throttle body assembly
If you've had the throttle bodies off to replace the thermostat have all the vacuum hoses gone back on correctly ? Idle problems are usually an...
No.2 pulls on the starter valves to allow air to pass for starting and the idle adjuster screw pulls on this plate a little for idle speed. If...
Separate names with a comma.
