they should be spring-loaded screws at the joints of the linkage.
I have the motion pro carb sync tool: Motion Pro - Syncpro Carb Tuner It makes this a much more manageable task, and lets you see how each of...
There are definitely some good prices on cl... wow. I'll keep that in mind.
It's M10-1.25
On the carb sync, the linkage between the cylinders has 3 adjustment screws. The no2 carb is the master (if I remember the numbering right). The...
Sounds about right. Voltage regulation in these isn't anything like on a car, especially at idle.
If the E21s were a bit larger, I'd have gone that route instead of an E35 top-box. The E21s just weren't big enough for a laptop in a padded...
And with that, anyone know what "bolt, u" means in the fiche and fsm? It appears that they are one of the locking flange bolts. Probably...
1986 VFR700 My sidestand nut has gone awol (I'm now blaming the Santa Cruz Mountain Metal Rats to this). Not sure why/how (I've never loosened...
Did you trim the side panel for that routing?
Also, since you went left sided, the hose went out via where the preload adjuster on the old shock went?
Can you take a pic of that? I'm worried about both tire clearance (for the reason you mentioned), and also that the adjuster seems awfully...
I finally got the shock Jamie built for me installed, but routing the shock reservoir didn't go as easily as I'd hoped. I tried to run on the...
I meant 1-1.5" radius on the front sprocket... But they're still pretty hand-wavy. And definitely a lot of force on that. New parts ordered,...
I ended up going the safe route. A pitbull front-stand (via the steering stem), and then jacked it up from a bolt through the center-stand...
Sparks, I don't have a lot experience with other bikes. I've owned one of these for 6 years, and done a fair bit of work on it. Certainly not...
New parts ordered (hopefully all actually available). BikeBandit had everything but the adjuster itself. Dillion Brothers claimed to have...
Cush is new (about 5K miles ago). And was in great shape when I inspected them when I had the tire changed.
Some say replace chain and sprockets together (I did on mine), but others just replace the sprockets if they have visible wear. FSM just says to...
Lgn001 - the adjuster is also bent, so I'm thinking it was pulled by the chain on swingarm movement, although the chain wasn't very tight (after...
Separate names with a comma.
