I run Rotela in everything I own, it's wet clutch safe and heavy duty enough for diesel. It's never let me down and never gunked up any of my engines.
I would doubt that the C collector box will fit. It's the same engine but looking at the two the F has indentions that I assume are for clearance...
yes, they are sealed bearings. yes I know what the film is for, these didn't have that and that would be part of my complaint. yes, I know there...
careful with moly lube, it actually penetrates the metal and builds up on bearings just like it does in rifle barrels, why I don't use it on...
What the H#!! is wrong with companies these days? I got new wheel bearings for the baby ceptor and as usual I popped the dust caps to check the...
Sorry, I'd been up about 22 hours when I posted before, they joys of being a cop. The vacume line should go to the petcock to operate the...
I had the same problem on my babyceptor when I got it, not long after it started I noticed it started to idle kinda weird. Was pulling the tank...
sweet looking ride.
when I had problems with the Sabre brakes and had to rebuild the master cylinder I ended up buying a big roll of vinyl tubing that would fit the...
hey, it's black and white, throw some DARE stickers on it lol. If that's too lame you could all ways get the other version of DARE that has "drugs...
I just swapped to Shinko from Bt45's. Basically old Yokohama (I think that's who it was). I can't say anything about wear but they do seem to grip...
I know the Magna and Sabre can be swapped. Not sure about the Ceptor since the engine sets at a different angle in the frame, The air box base...
Personally I hate to see em painted in weird schemes but to each his own, looks like a nice bike though. as for a seat, try an upholstery shop. I...
Kerker system listed on flee bay
I forgot I dropped to a 14 in front and went up one on the back so I'm running 14,44 instead of 15,43. stock speed in gears at 11500rpm 1st...
if you want to go through the trouble like I did a V30 Magna transmission actually helps A LOT. The ceptors has 1,2 and 3rd gears really close...
generally 3 teeth on the rear is about the same as 1 on the front. I've seen as low as 36 tooth rear sprockets. I did the "less rpm" at high...
As said before lowering can effect geometry but... a CBR shock conversion from Jammie and a LOT of measuring you could lower it a little in the...
They make "easy outs" for bolt heads HERE is what they look like. tap on lightly with a hammer and tap lightly as you break the bolt loose. They...
I've never seen one but it should be a fairly easy project for any machine shop. basicly a new housing with a cam to activate it.
Separate names with a comma.
