This happened to me on my 1990. My rr is new. I tightened the main power lead to the starter motor and this solved it for me. Hope it's this...
The "new" rad cap solved the problem. I did replace the crossover tubes anyway with success. I haven't used any coolant in over 1k miles. Where...
I've been chasing the dream of playing professional golf since I was in my teens. Now I'm chasing the dream of caddying on tour. Neither are likely.
I'm using them, gen 3. Love them, not a remarkable difference but enough.
When you say crossover tube, where is that located?
I found a used cap on ebay (20k mile parts bike) for 2.95 and it shipped for 8 dollars total. Hopefully this solves the problem.
Same problem has come up again.
Touch the button to answer or use voice commands. Wind noise is bad over 35 for speaking but you can hear perfectly music nav etc. I have this...
It will dip to 11.5 to 11.9 when sitting at a stop light and the radiator fan is on. I have the idle RPM set at 1900 / 2000. Voltage will drop...
Thanks for all the replies, I'm going to sure up the connections soon, next day off. It's been fine since the lead to the starter was tightened....
You can see where I installed the canyon dancer rings through the fairings, where the coil is bolted to frame. Look through the slotted portion....
I sure did. It was an incredible experience for me, I enjoyed it. I had a thread going in ride reports going so I didn't update this one. Thanks...
It's my recollection that all the carb boots are the same. Call a dealership and let them tell you the part numbers needed. Sometimes the part...
The bike has never died while running or riding.
Thanks for the advice everyone. How would I check or test the r/r? It hasn't exhibited these symptoms since I tightened the lead to the starter...
How would I test the stator? I've been over the obvious things stated earlier. The bike is acting normally / running and charging as of now....
Sounds expensive, and convenient. It's never shown symptoms of under charging when running. It's 13.8v constantly when running at idle. I've seen...
Anyone have an idea what to check? Happened again this morning, only this time, the lights were dimming out. 2 or 3 volts when key was on. It then...
When I attempted to start my bike, I turned the key to on, everything lit up normally, and when I pressed the start button I heard a click and all...
This was seen by a friend. I thought it was worth posting. [IMG]
Separate names with a comma.
