I haven't really looked, but as far as I know, it's the stock size... Here's are two pics: 100_0722 pictures from motorcycles photos on webshots...
$7...you gotta' be kidding me! For a buck and change, you can get a 4" round or square blank cover in the electrical section of any home...
What hose fittings are you using? Aluminum, SS, or Steel?
Sounds like your starving for fuel at high speeds. 1. Your fuel pump is dying and cannot keep up with demand from the carbs. 2. You have a fuel...
The PO mounted a 160/60 Avon Azaro on the rear of my bike and so far, no problems...
If you don't pre-fill the carbs, it will drain a battery trying to fill the float bowls. You're probably hydrolocking the bike with the unburnt...
Can you send me a pic of your bike. I'm thinking about getting the lowers for my '85 VF700F and it's hard getting "real" pics of bikes with them...
Try slightly pre-loading the shift lever before the shift. Also, lube the shift linkage.
Shoot this guy an e-mail. He's busy, so please be patient for a reply. http://www.drp123.com/contactus.html
Get a manual. It has the procedure in it. The screws that the brass tubes screw into are phillips heads below the sparkplug. You may have to...
Get OEM. The aftermarkets have a tendency to fail. I got mine from Dave Dodge: http://www.drp123.com/contactus.html Shoot him an e-mail. Tip:...
Replace your flasher relay. Universal one from an autoparts store should work fine.
Have you thought about modifying ATV or Snowmobile handguards?
You need a carb sync.
Pretty sure it's not the charging system. How far did you ride? 4-5 miles is about what the bike will run on fuel just in the float bowls. To...
Sounds like when my floats were stuck on my bike. Gas filled the cylinder and overflowed the carb boots. And also made it's way to my oil. -...
Bet it's the coolant reservoir drain hose.
If you run higher octane for some time, you will have problems with carbon buildup from unburnt gases. Plus, you are loosing power. The bike was...
If cleaning the switch does not work, the turn signal relay is bad. Replace with thermal universal one or even go to an electronic relay. Then...
I don't know, after all that work, it'd be a shame to bail now. For about $36 and several hours labor (free), it could be back up and running....
Separate names with a comma.
