白 I think is white 黄 I think is yellow 黒 I think is black. 赤 I think is red 青 I think is blue So... I think whoever marked this up got it wrong....
Is that a repaired frame or something else going on? Looks to me like an early frame with some bonus welds!
Ick. Rather bodgy and not the way I'd have done it but looks like someone has already bypassed the speed limiter. So just ditch the speed...
Personally I'm not a fan of EBC pads. For that very reason that in my experience they work well *once* they've warmed up but need warming up and...
Additional holes are for use with the emulators as you're removing the damping from the damper rods and moving it to the emulators. I can't...
100% this. The limiting factor on the brakes on the VFR is by far suspension. Sure they're not as good as the best modern brakes but in good...
Yes. This is to account for both manufacturing tolerances as well as thermal expansion. It's the same for every bike. Essentially you (firmly)...
Speed limiter.[ATTACH] Restricted ECU [ATTACH] Full power ECU [ATTACH]
So, the box to the right is the speed limiter. The one to the left is the ECU. Remove and bypass the speed limiter as follows. You can then also...
Oh, I'd not heard about carb tops being different but I can't be absolutely positive they're not!
You don't need to replace the wiring loom. I'll dig the details out for you. WRT springs etc, use the racetech calculator to work out what you...
There are diagrams and part numbers here: https://www.bike-parts-honda.com/honda-motorcycle/750-MOTO/VFR/1986/VFR750FG/10151 So water pump first....
Yours on the front there are external hex bolts too, the newer one has internal hex's so you can't apply as much torque to them either. They're...
Not just the headers! Bit late to the party but I was going to suggest you don't remove the engine unless you *need* to. I ended up cutting...
It always seems that the bike needs to get surprisingly hot before the fan kicks in. I've had a few in the past I've been getting quite worried...
...or at least *one* of the clocks I have works... The other one not so much. :( [ATTACH] On investigation it seems to be that the two...
Yeah, mine works fine... I think a mouse had a nibble on the H at some point though! [ATTACH]
Or just ride a dry clutch Ducati.... after that nothing will sound rattily again! Anyway, mine is an 1988/89 and it's still a bit tappy at...
NC35 is marginally better...but only marginally. 80's Honda seems to have massively over-engineered some things and then just not bothered to...
Rear caliper is a whole new pain in the rear! I tend to bleed it through normally then take it off, pump out the pistons until they're as out as...
Separate names with a comma.
