...oh, there was much of that...I just didn't share that part!
When re-installing the throttle assy, make sure the locating pin finds the locating hole - it will not go together if you don't.....learned that...
Next, (don't forget to do this) is to re-arrange the brake / master cylinder and throttle assy so the brake line is in front of the throttle...
I did a quick trial fit of the Heli bar - needed to gently pry the lug apart a bit to get it on the fork tube. Then I removed it and went about...
Here's some comparison shots of the stock bar and the Heli bar:
Now, the only semi-PITA part of this install - removing the stock damper units. When looking at the end of the factory bars, you will notice...
2 phillips head screws hold the throttle / switch housing together. The front brake master cylinder is secured with (2) 8mm screws. Once the m/c...
The first thing I did was to cover up as much of the front of the bike as I could, then VERY CAREFULLY used the grinder / cut-off wheel to remove...
From the info on this forum, it sounded to me like the heli bars would be the perfect mod for my 2006 VFR. Being 46, and more into cruising /...
Well, I've had my '06 VFR for about 3 weeks (just over 600 miles so far), and thought it was about time to start some mods.....don't know what...
Picked mine up last week...and i'm loving every minute of it! I ordered some heli bars and a zero gravity windshield for it already....then, just...
Greetings, Just bought my new 2006 Interceptor from the local Honda dealer last Saturday. Mine didn't come with ANY tools - first time I had...
Separate names with a comma.
