Any updates?
Check the coolant itself with a hydrometer. It's my understanding (I may be wrong) that too much antifreeze to water ratio will hurt the cooling...
It's your main Jet. I bet you unscrewed the main jet orifice, but did you take out the jet out that's under it. The jets under the main jet...
Drain some fuel into a clear container and see if there is water in there.
Oh, size does matter... it was common knowledge in my hot rod days that cubic inches was the cheapest way to gain HP. Nitrous is the second. I...
Keep a small screwdriver with you. When it quits crack open the drains on the carbs. If fuel comes out its electrical, no fuel - well u get the...
Well I bet my 700 is now faster than your average 600!!! Well maby after I get my clutch situated on the 1000 engine that now in it!:potstir:
Just dug into my clutch. I was able to remove the weird nut with a hammer and punch - was not that bad. Everything looks good except the basket...
Bump! I'm having the same problem right now, please help me bring life to this ancient tread.
Fixed the carbs. Was by stupid fault. I failed to pull the bottom section under the main jet and clean the little holes out. I had to pull the...
I have only run it up and down the street up until today (been busy). Well I ran it on the open road and it ran like crap. It ran like the carbs...
It's in. It's done. Awesome.... Kind of like when I replaced the straight 6 with a V-8 in my Datsun Z..... its faster than it should be. The...
Two more problems: 1) The rear valve cover's extra hump hits the bottom of my gas tank! 2) The stock aluminum airbox for the carbs is too small...
The rear cover on the vf1000 has a large hump from what appears to be an internal oil / blow-by vapor baffle. The VF700 does not have this....
I originally decided I was going to wait until winter (the end of the riding season) before I disassembled a perfectly running bike (not to...
Just realized the clutch push rod is missing from the vf1000f engine. Does anyone know if the VF700f push rod is the same?
Yep, the serial number starts with "SC15". I have been going over the engine real close. I just noticed the water tubes run to different...
Is the only difference in exhaust is the rear is a little farther apart? Well instead of buying a new exhaust or building a custom header, I'll...
Valve covers are bare aluminum in color. Besides a wider clutch cover, the engine looks just like my 85' VF700f.
Anyone have a good link to "The Gimp". Everything I found is a dead end.
Separate names with a comma.