1. Check to make sure kill switch is in the on position. 2. Check the fuses as you may have shorted one or more. 3. Go back over your wiring and...
I agree with Skimad4X4 above and It is always a good idea to do periodic visual checks on the electrical connectors. But it sounds like just a...
Where is that noise coming from? Has the wiring recall been performed? Call dealer to verify if you don't know. If the noise is coming from behind...
The LFX18 A1-BS12 can be had for $149.40 with free shipping on Amazon
Umm ok I think I might know what is going on here but hard to say with out eyes on your wiring. The on delay relay pins 86 and 85 are for the...
No, 87 octane is recomended by Honda
Yes, that is the stock location for the 6th gen R/R. Should have some inner plastic fairing pieces over it just to make sure that it doesn't get...
If it has a rear tire hugger on it then the chain guard gets changed out and doesnt have the indicator. Other wise it should be a pretty obvious...
Harshness of vtec depends on the conditions. Seems 3rd gear and hard on the throttle is the hardest. At it's most abrubt it felt like you kicked...
Hey, glad to hear you got your problem sorted out! Thanks for reporting back what you found. HISS isn't common in America so not too many people...
Short answer is NO. Long answer is Yes.
We need more info. How many miles/kilometers on this bike? Have valve checks been performed? Did this happen all of a sudden while riding and was...
What is the engine temp showing?
I've noticed the same thing on my '05 after I get home from a ride. Not to say that it is suppose to do that. I would think that it would vent to...
Do the brakes feel spongy, is the fluid clean? Also, keep in mind that the VFR is 100 lbs. heavier than the 919.
I've heard of mechanics spray water vapor/mist down the intake to clean carbon build up. Appearantly Honda cars are worst at carbon buildup than...
I hate this shim and bucket design that honda uses. My polaris has a set screw that pushes on the top of the valve stem and a jam nut to hold it...
Honda calls for a valve inspection every 16,000 mile but most people skip the first one. I did. Most people don't find the valves much out of spec...
Just out of curriosity what was the smallest gap you had? I'm trying to decide when to check mine. I almost waited to long on my atv. It had zero...
If you mean you had less valve lash than spec, then that is what typicaly happens. Keeping things simple here: Valve seat recession (Google it)...
Separate names with a comma.
