Mines 6th gen. Well I may have accidentally discovered the issue... For kicks i tossed it on the center stand and threw it in gear. Right away...
Well that makes sense. I was worried I'd have issues. I'm still going to add the missing oil. Thanks
Another update: Rebuilt the forks, new bushings and seals. Old bushings had the copper worn mostly off, the oil was absolutely gross! Sludge and...
Did a full seal, bushing, and oil change on the bike today. I'm curious as to the effects of oil level on dampening/suspension characteristics....
Update: New sprockets installed today, front and rear had minor wear and the front had some play on the splines. Rebuilt the crush drive, new...
Please clarify "at both ends" in regards to wheel balance. Mine have been speed balanced. If all else fails I may resort to trying beads in the...
Just had the wheels rebalanced and picked up today. No change. Tire pressure is stock I've tried going up a few psi in the front and few up and...
Unfortunately with the Q3+ tires the inside is almost "tacky" according to the shop that mounted them. By thier account beads would be worse than...
That definitely makes sense, and disproportionate load to the forks would absolutely cause change in the front dynamics. Almost want to...
One last thing, again, not condoning or excusing my choices but I did take the bike out to 140 on an empty freeway, had a leader run ahead, no...
The bike is abs and I did notice the brakes very lightly dragging when I spin the wheel. I've not touched the brakes other than to remove the...
Tires I feel can be eliminated given the old tires had the same vibration at same speed. Chain is new but I'm going to change sprockets as it's...
The only diagram I've seen shows them paired front and back. I actually had asked prior to the correct placement as the diagram I saw had them...
I've got an elusive vibration at speeds above 85mph. (Not condoning speeding) it's a pulsing vibration that seems to start in the bars and then...
Can anyone please confirm correct placement of the air intake stacks on the 6th gen? Do the taller pair go towards the front or back?
As far as I can tell the idle and high idle wax are one unit. I'm not sure exactly what is wrong. Idle adjuster was locked open and ever since I...
Got into the bike yesterday, found the rear right starter valve was stuck open. Freed it up and adjusted all the best I could with a cm hg vac...
Its definitely been better since cleaning out the crap but I still noticed a little bit of it today. All else seems intact and unmolested in terms...
Thank you for the input. Oil is new, strait from honda. Oil level is at the full line, actually was a bit over that but I drained it back a touch....
Theres alot of threads on this but few if any came to resolution. I've got a high speed vibration, rpm dependent, felt in the pegs, seat, and...
Separate names with a comma.
