Interesting, and weird. Larry
I thought the cooling system on the 3rd gen was pretty simple. Power, thermostat on radiator, fan and ground? Check the wiring diagram. You may...
Blackbird mirrors Lets see. I think that did it. Larry
90-93 use a flange joint with 2 bolts. Easy way, cut the pipe just before the muffler and use a slip on from something use, OR have an adpater...
Mirror turn signals Remove old signals, reroute wires to fairing and patch over hole and paint. Some mirrors do not have running light provision....
A. The 90-93 fairing is harder to find. B. With enough cubic dollars anything can be made to fit. C. The 4th gen was supposed to emulate the...
I know this took a lotta work. I got to ask. Did you notice that the stock (180 crank) front left and the rear right were teamed and the front...
My eyes!!!!!!!!!!!!!!!! Larry
I have the vario touring screen on my 93. Superior to the plain flip up screen for both airflow and looks, nicely built as well. Larry
Did it on my 93. Cut it off even with the bottom of the rear end and put a piece of SS sheet bolted to the bottom of the rear end at a 45 to...
Homemade, comfy, professional looking, half seat. Still need a pee break about every 2 hours. Larry
Well, the rear exhaust loop is under the seat, kinda close to that side. Make sure you're heat insulation is still there, and well as the rubber...
Anything is possible with patience, dollars, and tools. I personally adapted the Krasuers from a 80's BMW to mine. Realtively easy, and not...
So, is it rideable? All the parts there and trailerable? Pics man, we need pics. Larry
Question 1, LED's. Yes, they can be installed and legal, just make sure you meet inspection guidelines in your state. Question 2, RC30 or RC 45...
Nope, different shape. 90-93 only. My advice, redo the stock seat. Corbins are heavy and hard. Researh "Do It Yourself Motorcycle Seats"....
Nice, a virgin. Clean up, tune up and ride her. Larry
voltmeter You mean this? Note: Left fairing at round cutout provided by Mother Honda. Analog type from boat, waterproof. Wired to relay from...
Place the cowl on the bike and press in place for a minimal gap. Put a pencil ionto the hole and scribe a hole/ Drill clearance for the 6mm bolt...
USUALLY the Reg/rec takes the stator with it. I personally replace my reg/rec with one from a Hayabusa, complete with nice metal heat sink....
Separate names with a comma.
