Nice write up skimad4x4. Just a couple of points to add regards the 8gen. The 8gen tank capacity is only 0.8 of a litre less than a 6gen. However...
Interesting.........To be confident of fixing your fault, if your Kill Switch was causing the Fuel Pump not to Prime, then at the same time your...
Good the fault has gone hard, makes it easier to fault find! Further to Terry's good suggestion, do a simple check of your Main Fuse B 30amp. This...
Your Kill Switch performs two functions. It will lockout your Starter circuit AND it will cause the Engine Stop Relay to de-energise, instantly...
"I also tried unplugging the battery for a minute or two and replugging it back in to see if there was any error codes that would pop up. While...
[ATTACH] The orange coloured Ground block is located and taped in the harness above your chain guard. It can cause multiple sensor failures, poor...
Does the sound change if you pull the clutch lever in?
[ATTACH] Welcome RB. Hope you enjoy the 8gen and glad you got the Deluxe version, well worth the extra cost given all the extra bits that come...
Congrats on your purchase. Had three 6gens before getting the 8gen in 2014. My 8gen is by far the best I've owned and after 84,000kms it's...
I'm sure that's a typo error regards downshifting. The installation and operation guide clearly states for up shifting use only, downshifting...
Shame the OP has not posted what the fix was for his Starting Issues. Here's some general info for 8gen Starting Logic. Assuming ALL Fuses are...
[ATTACH] OK. If your clock is working then that at least confirms your Main Fuse A is ok. Your picture shows the starter relay with the main fuse...
Hi Fink. Guess you can see I'm new to the forum! Why on earth would the op create this in two forums? Can sure confuse new members like me and to...
Mate you are confusing me. Are you referring to the Starter Relay, the 4p Plug for the Ignition Switch or the plug for the Starter Relay as to the...
[ATTACH] If you are completely sure Main Fuse A is ok..... (The 30amp Fuse on your Starter Relay) Then have you confirmed the 4P plug for the...
Just for info. You only need to disable the Front wheel speed input to the Turn relay - Pink/Blue wire, no need to cut both.
Main Fuse A 30amp is what feeds your Ignition Switch and is the Fuse that's on your Starter Relay. Main Fuse B 30amp is located near your starter...
Separate names with a comma.
