Don't touch the internals of the pump unless you need to - no point opening that can of worms...
When I cleaned my tank using acid, I found that using an emergency plastic cap meant that I could rotate the tank easier... - Also it means you...
You may be better off just getting another 2nd hand one...
Also dry place the decals first. Use Fine Line low adhesion tape to get your marks in the correct place. Remember - YOU DO NOT HAVE TO GET...
for an 05 WHY !!!! Send them off to be cleaned - that transforms them.
I only do it for a tank that has needed treatments or just been worked on. I use StaBil for normal storage.
Yes - lol & its really cheap... Its really amazing how little oil is needed to have an effect. It will also burn happily in the engine. After...
The best way I have found is: after rising, add a capful of 2 stroke oil then totally fill with petrol and then slosh it around....
note this happened 10 years ago and is still affecting users of 2010 bikes.. I wouldn't risk it, as I'm not aware of any problems with the 2012..
you want to see if the engine has seized before doing anything else and you want it lubricated first...
first thing is pull the plugs & put spray some wd40 into the head. Leave it for a day. Remove the rocker covers & put oil everywhere that...
Although I haven't bought one I also looked into this exact subject. In summary, I wouldn't buy a 2010. The changes to the 2012 are useful...
I put 2 coats - a light & a full of clear on mine before doing the decals, it then had another 2 full coats of clear once done.
Terrific buy & excellent choice on the trailer rental... Look forward to future updates...
No, John... The bike is happy where it is.. LOL - its Jim McCulloch & Coldevils fault... Jim is looking at options other than putting his...
I had a little knowledge passed to me from a racing car engine builder quite a few years ago. It was on the lines of: if it wasn't in the engine...
The fact you have realised the risk means its time to change.. I'd also hate to dump the bike in that position... Everything I have read and...
As a cautionary note I had a wheel come off my boat trailer literally 50 yards from my house AFTER a 90mile trip driving upto 70mph.... with the...
Main issue with cheap trailers is the 10' or 12' inch wheels. Basically the load rating and bearing size are not great. Having a 13' wheel (or...
As a side note to this - I also have the HOT Cams Shim kit & seriously suggest you DO NOT install them without checking the sizes first. In...
Separate names with a comma.
