Is it worth it to swap from the airbox to pods? I have a bike that once had cali emissions equipment on it. Mostly/sorta removed by some...
If they're that stuck in place, I'd soak it in solvent (pull all the plastic/rubber bits off), and see if that helps. For jet kits, my...
My wife and I are just finishing re-assembling her Hawk from a full tear-down and splitting of the cases. It's not hard, just pay attention, and...
Ever since it left me on the side of the road with a dead R/R, I've been a little gun-shy. But when I ride it to work, it's 70 miles a day, so...
The Honda service manual is pretty detailed on this.
Steering stem's done, rear-end is back together, just need to get the front-end back together (and wait for the brake pads to arrive).. should be...
In a car, I take it out, and do a series of stops from 30 down to 0, working my way up in speed, until I can tell by smell and feel that they are...
Situation: Bike needs new pads badly (they don't grip well, contaminated, or something). They might as well be wooden blocks. I ordered new...
Post reports when you're done!! I lust for the 848's svelte weight and hp...
so what exactly ARE undercut gears?
27, the springs, are what I'm short one of after my get-off back in the fall. Not sure if it popped out when the bike went down, or I lost it...
Only if the ones from Honda are...
Found the problem, they're in tight against the spacer, so I can turn the both bearings and the spacer together as a set, but not a bearing...
Sorry for the delay on the pics, I've taken them, but having some issues with the camera talking to the computer. Hopefully tonight or tomorrow.
I was worried about that. I'll poke more when I get them home (they're in the trunk of the car right now). May call up the shop and see what...
Been to the lodge a few times, mainly to see friends in bands perform. They were recently bought, and the place is getting a much-needed,...
Bike's torn down, just replaced the tires and wheel bearings/seals. Waiting to go on it right now: - wheels - steering stem bearings (old...
All-American aka Donati in SCruz is good, but parts are $$$ and they're way south in SCruz. MDK in Redwood City is a pretty nice place, but...
How much drag should there be in new wheel bearings. Just picked up my wheels from the shop, and the inner races in the rear are tight, but...
This is why I built an adapter for the Motive PowerBleeder I originally picked up for the cars. Pressurizes the system to 10psi or so, and forces...
Separate names with a comma.
