My 2000 was laid down by a PO and the pedal was bent. I bent it back with no heat, mounted on the bike. Works fine years later. I'd have a...
I agree. Those look like shear bolts. You have to drill out the bolt heads and remove the remaining Bilt with some vice grips. Jose
The Evans heavy duty is actually a mix of ethylene and propylene glycol with some proprietary stuff. The reason for mixing the two is that...
One important thing to realize is that the pigment used in the anodizing on these levers does not have any kind of UV resistance. Mine have faded...
It's actually sold in 1/2 gallon jugs at $35 each. As I recall, one gallon is enough for our bikes, so it is definitely more expensive than...
How hard core are you? I run Evans waterless coolant in my M6. Very expensive, but worth it to me. Plan to do the same for my VFR. One fill...
I uncovered her yesterday and took her for a spin. She has been covered for a month or so while it rained and I worked out some kinks in my M6....
Remember what I said early on growler. A lot of folks here have ample experience. When we read things that look like bad ideas, you will get...
Yes, I think you could easily do two small pads on each case half, or maybe you could do one larger pad on the top half with a hinge that lets it...
You can attach the airfoil, but it runs about $150. The whole screen was $175. I did see someone make an airfoil out of a firefighter face...
Hey there, Growler. Many of us here have been riding for quite some time. Pay attention to the themes brought up and learn as you go. Time...
My bike had a Micron high pipe when I bought it. I replaced the can with a Supertrapp, but I re-used the mounting system. I am confident this...
The MRA provides outstanding wind protection. The airfoil thingie on top makes it adjustable so you can have more pressure against your chest on...
I just bought an MRA Variotour and it is absolutely top notch and I don't hesitate to recommend it. [IMG] You can still see through the...
Ok, where the hell were those when I was looking around? I agree that they look right. Shit .... I might have to buy those. :unsure: Can you...
Tink has been happy with his. Maybe you will like them enough to keep. I wanted something that was all metal. I bought something without led's,...
I had a similar experience to pnero01. Mine folded back while I was riding and when I tried to pull over the mirror jammed against my handlebar...
Lots of good sounding stuff. We did a 3 bone prime rib with baked potatoes, broccoli and roasted yellow potatoes for my daughter. MAN was it...
Didn't notice it was a wayback thread, but a China member revived it. Maybe that bike is still around. Jose
The gold comstars look reminiscent of a CB1100R. I have never heard of a 1983 VFR750R. IF that is a factory fairing/configuration, it really...
Separate names with a comma.
