CRFan, I simply removed the PC V, to make sure I saw the same problem, which I did. I connected the PC V back. same problem. I do not have O2...
So this problem still plaugues me. I replaced the fuel filter, more as just a maintenance item, and I get the same problem. I brought my bike...
Any issue with taking a dremel type tool to a fuel filter to cut it open and check it out? I just had mine replaced and I would just like to see...
Anyone know? I am sure the "fuel return filter" is the metallic scrubby thing, but is the white square pad looking thing part of that? Or a...
I have no add-on electrics other than my PCV. I already removed the PCV and have the same issue. My VFRness is not blowing its 20A fuse, so...
Just an update, I am still having this issue and its maddening! I had my valve clearance checked (everything is fine), new plugs, oil change,...
zoom, yeah its the coating wearing off that is making all of it look like a mess! Coating looks great when its new though! I figured I could...
badbilly, I probably didn't mean rear sets, I am talking about the rider footpeg and pillion setups, the factory ones, they are silver of some...
Here are some pictures, I am not sure if these are 5th or 6th gen, but you can see there are two things. 1) The white square pad looking thing,...
On the VFR800, the rear sets, and pillion sets are in a "silver" color for most bikes. I want to have mine re-painted, likely powder coat (I...
The service manual states (p5-56) "Always replace the packing with a new one.", It then shows a picture with an arrow pointing to the packing and...
I am running the original stock suspension (32k miles) and looking to improve it, but not spend a ton of money. Race Tech has fork rebuild...
Hairspray works good too. I just bought new grips, and honda grip cement. With the cement applied, grips go right on. Then after a short time...
Did you get Autotune on your PCV?
Danny, I pulled the PCV, but still have the issues. Also I think what your saying about the O2 eliminators is a bit incorrect. Yes its true,...
patrick78, so what was the eventual outcome? Did you pick up a PCV? All better? Still losing power at constant throttle?
Some more information (but please read the post above this). I went to rule out the FPR. I checked the vent line, and there was no gas in it,...
Here is some more update: I took off the airbox and cleaned all electrical connections with electronics cleaner, and I use MAF cleaner on the MAP...
friedleyjr, Just got done removing the PCV. I unplugged it but left the O2 eliminators in (My old O2 sensors are no longer usable, I cut the...
Looking for some direction from you all on my problem, here is an update: My O2 eliminators are good. Tested 330ohms, solid clean connections. I...
Separate names with a comma.
