What setting are you referring to? My understanding is that for the power commander to influence closed loop mode you need an autotune module....
When you say "I can't run closed loop without the O2 sensor" you mean the stock O2 sensor or the autotune?
well in theory, if the O2 sensors report back "all is cool, don't do anything" back to the ECU........then that's what it should do. SUCKS! i...
Thats a total PITA, I am not willing to live with this. In closed loop mode it needs to be able to do its thing, something has to be wrong.
amc401, so are you all good to go now? My bike is doing something similar so I wanted to see if you nailed down the exact fix.
If they were "bad O2 eliminators", its just a connector and a resistor right? So what would I do in that situation, just buy a resistor and...
I have a 2003 VFR800. If I goto say 5k RPM's and hold throttle, my RPM's start to go down slowly, until the bike is surging like crazy (once the...
I have 6th Gen VFR800. After riding I notice my swingarm is hot. I wouldn't call it warm, I would call it more hot. I needed my rear brakes...
Mileage is just under 32k. But I bought this bike used and have no service history on it. It does run a bit rough and has vibration at higher...
I am going to take my bike to have the valve clearance checked, starter valves synced, plugs changed. I want to make sure I have all the parts...
So I installed the modified Cozy v5 map (for PCV) and it seems to work pretty good, so much better than without the PCV. Still bumping this...
I have been trying to read as much as I can on this. I have a 2003 VFR800, with a Two brothers carbon black exhaust and K&N filter. Two...
Honda had an official accessory that was a top bridge cover with carbon look. There are other ones "like" this out there, but I am looking for...
I put on my Two Brothers Black Carbon Fiber exhaust today. Made a big difference (in the way it sounds). I have the included suppressor in, and...
I switched, well, sort of. It will be here today (two brothers black carbon fiber), and I will throw it on, so no looking back :)
I did read later, in the service manual, that I shouldn't have used carb cleaner on the throttle body, because its coated in molybdenum......
I have had it with this gutted stock exhaust. I am going to buy the Two Brothers Carbon Black setup. I watched many of the videos and it looks...
Can I/should I clean any of the sensors connected to the airbox, like the MAP sensor? Would I use MAF cleaner? I figured since I saw some oil...
Update. The previous owner has this K&N installed. I removed it, cleaned it, and I am waiting for it to dry to re-install. I noticed that the...
So i used carb cleaner and just wiped around the openings of the throttle body. I can use a vacuum to suck from around the throttle body, but...
Separate names with a comma.
