if you feel up behind that voltmeter you will discover that they is a dead space on that side of the panel. Than means you can fit it about as...
great news, thanks for the update & enjoy your VFR.
you are in for an interesting time - lol.. Now there is a fuel injected 400cc motorcycle - think the CB400SF Hyper VTEC Revo from 2008 was so.
Correct Impact tools make all the difference in this case. Not a impact drill however.
If you have never done it but are competent its a fairly easy task. Points to note: If i was changing the oil, then I would also change the...
LUBE...…………………… & TEMP...………………….. Hi, I set my regulator at 95psi. Its all about lube & if the rubber is warm.. I've had issues with some...
Take it to a good shop with a new generation balance machine - they truly are now state of the art., the machine will tell the operator if it’s...
personally, if the wheel is balanced then ride the tires off it...
Easiest way to check. Put bike on centre stand or rear stand, zip tie a pencil to the REAR lower subframe so the nib can ONLY JUST touch the...
Don't worry about painting over the old bolts - I always replace with stainless anyway but you can after its all painted clean up all the bolts....
I go 50/50 on the coolant & change every 2 - 3 years
lol - how i do this is as long as it is suitable for alloy engines then its fine - Changing it is more important. I just use the basic stuff...
oil might be a smart move too
honestly, if you want to waste time and money then stick it in. Problem you have is getting the seafoam to the areas that need cleaning. Thats...
you absolutely want the air gap to be correct. You will be able to ride the bike but dont hammer it.
i did once install the master cylinder seal backwards - could not get pressure. could bleed but would not get pressure.
Just want to check - did you try and start it with 3 1/2 year old fuel? Anyway, you are pulling the carbs off. The bike is still bulletproof,...
I use a YTS-12 & believe a YTS-14 will also fit.
Trolley jack & couple of pieces of wood do the job very easily. Now to protect the frame then cut up old plastic milk containers & masking tape...
Like the composition...
Separate names with a comma.
