[IMG] Here it is in the flesh, sporting the Numero Uno. Honda Museum Motegi.
I believe those look much better tucked in. Who cares where they are from, as long as they work.
[MEDIA]
I recently restored a set of gauges and I removed this screw without much of a problem. I could see an issue with dissimilar metals corroding...
Holy Mother of Zeus, PRISTINE.
Radiator shop shouldn't charge a whole lot to have them put it in their hot tank and get it cleaned up. Then you could repaint it with some heat...
Yes, the temp across the radiator will not be huge, but it will show you whether or not the radiators are functioning as they should. If you...
Most modern sportbike engines make their best power when the cooling temp is in a range of 195F and 205F. The lower range is controlled by the...
I believe it would be best to get a direct reading of the actual coolant/water/cocktail, but that is going to require a temp sensor. I would also...
It's been quite awhile since I last posted an update. So here goes... Worked today to start finishing off the gauges. Mocked it up with the new...
I'd start with what has changed between now, and before it started....the tire.
:Pound:
All Balls bearings are manufactured in China, I'd stick with the Japanese bearings, or the SKF. Might not be a big deal on anything that doesn't...
I've got a brand new Brembo RCS17 radial, still in the box, that I don't plan on using and might be persuaded to sell....but I would guess you...
I would stick with OEM for every one of those, except for the RR, for that I'd prolly go Roadstercycle and get a Shindengen MOSFET. As far as...
:Laugh:
Hanging idle is indicative of a lean condition. This can be caused by carb boot leaks, jets and passages that aren't completely clean, air leakage...
I have found that spinning the pistons, while pushing them past the seals, normally takes care of any chance of rolling the seal.
If you wear one and the other doesn't, only reduces your chances to 80%. If both are wearing a mask, it cuts it down to 1.5% chance.
Paddock Pass Podcast - David Emmet
Separate names with a comma.
