+1, the broken spark plug paired with the extra engine, included in the sale of this bike, doesn't sound too good I'm afraid... Please keep up...
I'll add,,,if you are going to separate the throttle bodies I would recommend adding Mike Nixon's tech manual to your Honda library shelf...found...
If I could make a suggestion. Pulling the carburetors to clean all the circuits is a good idea. Remember to keep the throttle bodies on the...
The code stamped on the jet needle is not arbitrary - it is a Honda part after all ;-) This code references the taper on the jet needle. The...
You are quite welcome. Hope all goes well with the search.
The sizes are the same, the aesthetics are slightly different. The '84/'85 models have polished rims the '86 does not.
Nicely done! If I could ask, do you have some behind the scenes photos of how you went about fabricating this? [IMG]
Congrats on the purchase and welcome! kRs are very nice indeed. Please post a few pics when you have a chance.
+1 If I could add, if you are really considering keeping this bike Step One is to purchase a used copy of Factory Service Manual. I would...
The jet needles differ in their taper.
+1 [IMG] [IMG]
Below are a series of photos of right hand control from a '91 VFR750F. Perhaps someone who has a VF500F control handy on the workbench can add...
I believe that while the CBR600F triples can be installed without modification the forks are too short and will cause a clearance issue btwn the...
You are very welcome. Hope this will be of help. I'm afraid I don't have Mr. S's run down on the CBR600F wheel conversion but you can find...
If you have a Mityvac it is easy to do. Connect this to the vacuum line, apply a vacuum and check to see if the fuel will flow. Here is a...
Here ya go..can't vouch for the accuracy as I haven't done this conversion but this should get you on the right page. The following procedure was...
It could be your petcock vacuum has given up the ghost. Have you checked to see if this is functioning correctly? If this is the culprit, the...
I believe that bias-ply tires are currently your only option for the stock rims. Here is a great article on top rated bias-ply tires: [IMG]...
Thanks for the post! [IMG]
Thank you for the compliment. I had a lot of fun working on the 17" wheel conversion. Much of the credit goes to my friend Rick Denoon as he...
Separate names with a comma.
