Factory Pro ,San Rafael California, 1-415-491-5920 #40 slow jet
So NO ONE has any experience rejetting a vf1000R or VF1000F ????
Looks very good,too bad you have to put a fairing on it!
"learn't" No such word. It is learned. Now you really HAVE learned something. Unless you want to make people think you are a hillbilly.
Sounds like a warranty problem. 5,000 miles!
V4 Chopper right side
V4 Chopper left side
A phone and a motorcycle? Sounds like a good way to get distracted and killed. Just my opinion.
When a valve is tapping that is not all bad. Let me explain. When a valve is to TIGHT it means it is making no noise BUT it means it is not coming...
I was NOT talking about freeze plugs. Freeze plugs are stamped sheet metal and are more than one inch in diameter. The lead plugs I am talking...
Not quite. The carb cleaner will get sucked into the air leak and cause the engine to speed up. If you have a can of dye penetrant then it will...
If it did not boil over and have coolant leaking every where you are probably ok. There is a difference between hot and overheating. I grew up in...
With that low amount of mileage i would rule out the fuel pressure regulator. But you can check the pressure. Get a gage and get a workshop...
I am replacing the start switch and I got one from A VF1100 and it seems much better design, It is a spring loaded slide in and out style instead...
Thats what I would say because I was taught that you cannot diagnose any fuel injection system until you know the fuel pressure is correct. Also I...
It took a whole year of hard work. It seems to slow down near the end. The frame and fitting of the engine is very hard work and then after it is...
The rubber hose on the back side of the carbs? Need to be more specific. Where is it coming from on the carbs?? It could be the float bowl vent....
You cannot diagnose ANY electrical problem until you have a SOLID source of "12" ...(13.8)volts
A battery when fully charged should be between 13.2 and 13.8 volts. IT has six cells and each cell is about 2.3 volts. Yes...I know they call it a...
Good job. Hey i noticed in the photo that the exhaust header is rusty . You could hit that with a wire brush and some VHT flat black paint. Right?
Separate names with a comma.
