Those are not vacuum lines. They are float bowl vent lines. You can just put them back through the air filter housing and that will solve all the...
"Can I just put together anyway" Um huh.
I am trying to get my V4 going also and it is the VF1000R. The pulse generators are interchangeable between the F model and the R model. The...
Almost all modern motorcycles have alternators. The alternator,via the rectifier changes the current to dc to charge your battery. (simple...
Thanks! I found out you can get condensers too. They are just to suppress noise on radios. They are 5,000 ohms. NGK sells a complete boot with...
Thanks for sharing the photos! How did you get the carbs that clean?? Would like to know.
Actually the LOWER the resistance the faster the light blinks. If you do not believe me, unplug a blinker and watch how much faster the remaining...
The nature of electrical problems is that they are intermittent. Visualize this...... You have a battery and you have a blinker LIGHT. But...
Very common. Milky white or coffee color is from condensation. Certain times of the year when you have warm days and cold nights. You see it more...
#115 mainjets for VF1000R or VF1000F? Need 4. Yes willing to pay. luky@sonic.net
It is a chopper. Rake 42ยบ
Some of you may remember that I was building a motorcycle from scratch,including the frame. I am using a VF1000R engine that was rescued from a...
HONDA does not sell plug wires for the VF1000R. So I made my own. I got the 7mm wire for $1.00 per foot. It looks just like the original wire. The...
I HATE those EBAY sellers.!!!!! They sell engines completely striped and then make you go on an Easter Egg hunt to find all the right stuff again....
Can the HONDA VF1000F and VF1000R ignition boxes be swaped? I have a VF1000F wiring harness and a VF 1000R engine and do not know if that will...
Yes I have found that to be true also, about bleeding the master cylinder first then the whole system. The master cylinder has to get filled up first.
there is another way also get a one foot piece of tubing and put it on the bleed nipple and put the other end into a glass jar with brake fluid...
By the way... Thanks for sending the carbs right away. Don
It has rocker arms so the tappets are the screw type. Only buckets over a valve stem have shims. Newer engine types that eliminated rocker arms.
What size jets did you go to? Mains and idle. Did you use stock needles?
Separate names with a comma.
