re flooding etc Vacuum petcock. Was left on for 4 days last week and maybe that started the problem. I ahve removed the carbs, taken off valve...
O.K. So i decided to drain the oil just in case there was fuel contamination. The oil poured out and was very watery and smelled of fuel. I...
This may sound slow but if I understand, you opened the drains after attaching the lines to see if they continue leaking after initial draining? I...
Re needle/seats etc, Thanks. I will take off the tank and see if I can spot the leaks highest point. That should narrow it down a bit. Really...
So, finally got this running after cleaning all of the contacts from the tank back to the ignitors, etc. Still no tach but i will deal with...
Thanks. The coils, if placed side by side and with the wire connectors facing "left", are identical....which is good. I ahev cleaned and...
Howdy. Trust all is well. Just started to check all of my wiringh to help with weak spark issues (all 4 plugs). The manual download link covers...
Thanks for your advice.
I ahve a chance to pick up a carb from an 84 interceptor 750 and I am wondering if it can be a straight swap onmy 83 saber 750? I believe the are...
Hello again. This was sitting for 2 years and the carbs gummed up. i c;leaned them out (twice) but have issues with spark. The bike did start at...
Hi. Hope to get this running this year after wasting much time cleaning the carbs...a few times and now have spark 9no tach) issue but i also have...
thanks for valve clearance advice but one short question Thanks for all of the advice. The last bike I operated on was a cb350 twin. So, to...
So, I bought an 83 that needed a complete carb cleaning due to sitting for two years. Started but ran rough with some backfiring and a bit of...
Further to the above Checked those. My spark tool tells me that all 4 are firing (and plugs seem fine). I will have to remove carbs to add...
Ordered 4 float gaskets for about $22 from Sirius consolidated. Had found a U.S. site that was selling carb kits (needle, gasket, o-rings) for $14...
The dealers were showing a discontinued flag. Honda customer service claimed they had no obligation to supply prts for buke over ten years...
The body of the "t" is larger in diameter than the tube you are soldering within. The outer body gives the o-ring something to fit against. This...
I broke my fuel inlet tube from my 83 (or it was cracked and i completed the job). As Honda doesn't support parts for bikes olden than 10 years, I...
So, I finally bought myself a saber. Have been wanting one since they first came out (I was then riding a cb350...). The one I purchased had been...
Separate names with a comma.
