If the 8th gen is the same as the 5th, the exhaust can be unbolted at the footpeg and loosened at the clamp, then just rotated downwards to clear...
Hi Miha, and welcome. Are your brakes unusually draggy? How hot is the back disc when you're not using it? I'd suggest checking that the vacuum...
I bought a set of float bowl gaskets from Aliexpress and they were actually a great fit. The only problem is they swelled a little in the fuel,...
For the effort involved trying to clean the pilot jets, I'd say just buy new ones. Main jets are comparatively big and much easier to unclog....
The S, H, V or Z ratings refer to the maximum continuous speeds that the tyres are rated for. Speed = tyre heat. H max is 130 mph, V is 149 mph....
Just in the transmission? [ATTACH]
I think there's a detente spring and a ball bearing in there somewhere to positively locate the positions...watch where that goes!
I just pulled off a 12 year old Michelin Pilot Road 3 from my VFR; actually was working quite nicely but I wasn't feeling that confident, and the...
That must be a real pain to have to keep replacing stators. I have only replaced a stator on my Silverwing scooter. That one had an oil-cooling...
The bolts may be Torx holding the ignition to the yoke. And they certainly will have threadlock on them. I think you can probably get into the...
As you can see from my Avatar (<---) I have some V4 history and owned a VF750F when it was basically new (and I was a lot younger!). I "had" to...
Damn...I forgot the HRC sticker. I'll get right on that.
Sure sounds like the Captain has nailed it. You've got an intermittent electrical supply fault and my money (if I had any) would be on the...
Apparently, when asked which is your favourite child, you are meant to pick one of your own... Grum makes some salient points...all of the...
I thought the Bridgestone BT45 or 46 were perfectly decent tyres in the stock sizes, and the 46 is a current generation so should be available...
Your brake lights are powered through fuse E, along the W/G wire to each switch, back through G/Y wire, passes through a single 3P plug (I presume...
The diagram is from the service manual, I don't have a 1200 but hope it helps. [ATTACH] If you want to use LED's you are best off installing an...
[ATTACH] Get some genuine parts from somewhere like Partzilla. I'd suggest replacing 14 and 6 on the diagram, those are the roller weights and...
The starter clutch has some heavy rollers that throw out and disengage when spun fast by the engine, but lock down and grip when driven by the...
Certainly sounds like you've checked the right things externally. Next step would be to remove the airbox and expose the throttle bodies; maybe...
Separate names with a comma.
