The shape of the seal lip also gives a clue to the orientation, the lip will normally be near right angles on one face and a longer slope on the...
https://www.bikeexif.com/custom-bikes-week-189 A cool 500-based custom. [IMG]
I have been using Permatex Plastic Welder epoxy on the ABS fairings on my Silverwing and that stuff is incredible. If you want to make it more...
I have a feeling that you might be on a wild goose chase with the ECM. The idle screw and SVs are all linked with the "choke"; the choke and the...
I put an MRA "-R" light smoke screen onto my Silverwing scooter a week or so back. Really nicely manufactured piece with a lovely finish. But,...
I think the HISS system was sold into many world markets but not the US (and maybe they included their northern neighbours). Certainly my 09...
It is good when a supposedly serious problem has an easy solution. I had the opposite on my Suzuki RF900R which developed a lurch under...
Not the easiest place to get to; three train rides plus a taxi from metro Tokyo, took us all day. But well worth the visit. You can take a virtual...
Oooohh! Motegi photos! I'll see your NS500, and raise you one NR500... [ATTACH] I loved Motegi!
Nice soundtrack. I noticed the engine temp dropping from the 90-odd at the start toward the low 80's while having its tail pulled hard. Really...
While you/the shop are in there, why not also get the bushes replaced? These are the bits that allow the forks to slide, and they do wear, and are...
Yep; sounds like a bag of spanners at idle, but get some revs on and the sound is quite addictive...
I've had a spin on the Tracer and also the Niken. The triple motor did not excite like I thought it would, it felt kind of gravelly and not smooth...
My favourite is Front End Chatter, I also listen to Braptalk.
No fault codes means the FI system believes all the measurements/instruments are OK so that rules out quite a bit. You don't mention spark plugs,...
Are you seeing any fault codes flashing (the FI light)? I recall once leaving the hose off the MAP sensor on the back of the airbox and it ran but...
Your difficulty and my difficulty might be two different levels... Fork seal changes involve: Jacking the front end up Removing calipers, fender...
On my 5th gen non-HISS bike, the ignition was bolted to the underside of the upper triple using Torx bolts; these had threadlocker on them and...
Thanks for the tips, NCB, I will remember that for next time. I didn't think I had filled too fast, as I was squeezing the liquid in from a water...
I am very pleased that worked out for you. I've been working on my 600cc Silverwing scooter today, drained the coolant, then re-filled it with...
Separate names with a comma.
