I'm tempted by the moto-cnc bar risers but wasn't sure how to determine extra length for the brake & clutch lines.
Next steps, I'm thinking I should get a SMC rebuild kit and check if the rear caliper is seized.
Yeah, I think most circlips are stamped metal, and the flat side is supposed to take the force. Wasn't obvious which was the flat side when I...
I put new seals on the front brakes on my 5th gen last year. This year I added galfer SS brake lines. I also put speed bleeders on the calipers so...
The galfer lines are installed. I also rebuilt the front calipers using a brakecrafters kit. A line wrench is definitely recommended for the...
I had the fuel injectors cleaned by a local specialist when I replaced the thermostat. I did destroy the little injector orings while...
So I punted on repainting the brake calipers but decided to do the fork lowers. They had some corrosion and fair number of chips. [ATTACH] I...
Forks are WIP Here is detail from the lower race. You can see a small indentation, it doesn't look like much but you could feel it turning the...
86vfr lower bearing race removed
86vfr lower bearing race
86vfr upper bearing race
86vfr triple tree
pivot works steering bearings kit
Confirmed; the kit comes with one dust seal. It also includes a small tube of bearing grease. PXL_20230324_183012970 by chuntera posted Apr 2,...
I had issues with a slow leak at the float valve. As part of the last rebuild I left the carbs overnight hooked to a hanging fuel bottle to check...
Has anyone noticed the honda 98-01 service manual buggered the fork disassembly instructions ? It looks like they transposed photos between a...
I bought PAIR block plates from mello dude two years ago. There are good quality and haven't given me any problems....
So the "old" way to do this is replace the sight lens with watch glass. The advantage of this is the mineral glass will last longer, harder to...
Removing the steering stem was a classic episode of man vs. nut; 3/8" ratchet? nope, 24" breaker bar? nada, electric impact driver? not happening,...
The forks came off this weekend. The dust seal on one fork was in bad shape and the circlip corroded. Here's a photo of the forks on the bench...
Separate names with a comma.
