Maybe you have a bad or wrong value resistor. Mine is Aust version and its OK
Yes its the HISS immobilizer light which flashes when the ignition is off. I thought they all had it. Dont you have that in the US?
Ive done 1320Kms (820 miles) in a day on several occasions on VFRs in reasonable comfort, but I wouldnt attempt it 2 up. The bike is a good solo...
I got mine from morepoweracing.com also. I have bought quite a few things from them no problems.
I upload maps to mine all the time with the engine running. Thats how I tweaked out that flat spot just above idle.
Or you can upload it with the engine running.
Sorry its 9 bolts holding on the LHS panel including the 2 attaching it to the inner cowl
Take off the LHS side fairing panel first by removing the 5 bolts as described in the owners manual and the 2 plastic clips under the bottom...
Well, I agree that removing the snorkel and flapper is worthwhile, and produces a sensational induction roar, (actually I think they are only...
The Australian version calls for 91 octane minimum and has a compression ratio of 11.6:1.
Its a good idea. I had a VTR1000 last bike, and I fitted APES to it as well. One thing I found was it was difficult to do up the locknut and...
I cant bring myself to flog a new engine. Its a good idea however to open up the throttle in short bursts, avoiding high RPM to help bed in the...
Cant they just take off the front valve cover and visually inspect the valve springs? What oil do you use? If you use a full synthetic try...
There are already manual ccts available for the VTR 1000, made in US by APE. There may be APE ones that will fit the VFR, I dont know. The...
There is a map for that setup on the dynojet website I think, albeit a bit rich. Mine is an 07, different vtec engagement point, so prolly no...
Here is a VFR world sticker in Australia. Should I have turned the picture upside-down? Thanks RVFR [IMG]
I'm on my 3rd VFR now, and the 2nd 6th gen. The other one was a 5th gen. In between the 2 last VFRs I had a Blackbird and a VTR 1000F. The VTr...
Paul- Adelaide SA-2007RWB leos, PC3 etc
ABS plastic can be plastic welded by a specialist, otherwise a good quality thin cyanoacrylate works well.
A possible explanation could be differences in the PAIR system on each bike, or maybe one has it disabled. I just disabled mine, and now the...
Separate names with a comma.
