The reversed polarity jumper was essentially wired in as a series battery to double the voltage. [edit] The battery positive goes thru the 30 Amp...
It is normal to require choke enrichment to start when the engine is cold. If the choke doesn't seem to work and you have to open the throttle to...
Does the 84 have the crossover air tube and schrader valve on the forks too? Those things can leak out the air and feel very dead--an...
That's what she said... How many miles on it, and when was it dropped?
i don't have a clue about that white she-it, but soap and water is good to start. i like to soak the whole rack of carbs in pine-sol for 24 hours...
haha, squirrel's on the rag...(been there, done that)
Bravolingus, that's an instant hard-on, and you are a paint-scheme genius. Nice touch switching to a Pit Bull stand, Charlie used to ride one of...
There will be some pictures of this broken plug? The one who cuts with toes would probably like to see them also.
Your battery is no good. The extreme voltage sag under load is the clue. A trickle charger cannot charge a battery, only float it once it is...
Howdy Scott, welcome to the Vworld If you can post a picture of the springs and linkage in question it might help, but generally the small...
I gotta gal, Her name is Sal, She won't do it, but her sister will. Oh yeah, Oh yeah, Vajinyah boys mighta been usin' that thang.
i use conductive grease made for use in electrical contacts on the battery terminals, and i use insulating dielectric grease on the non-conductive...
+1 on FJRyder Worn tips on the engagement dogs for second gear from shifting so fast that the clutch doesn't have time to do it's thang--it's...
The carb body castings have that port on both sides so that any carb can be processed to fit either front or rear, left or right position. But...
did you use conductive grease in the terminal, or coat the outside of a connection with dielectric grease? Also with the heatsink compound--less...
The answer to all, including the Bonus, is in the carbs. You don't adjust the idle using the thumb screw--idle is adjusted using the mixture...
what size is your drill bit and how far did you stick it in? An electric guitar string, e.g. 15, should push through almost 2 inches if it is...
That's the shiny metal cover. there are two holes, one large and one tiny underneath the silver cover. the reason it happens when cold is that...
The bell-crank pulley on 2nd gen comes off the end of carb #2. This is the same on 4th gen, but 3rd gen comes off of carb #1 and needs a longer...
What do you measure as the battery voltage at rest, with the key on, and when pressing the starter button?
Separate names with a comma.
