Well that would explain the low compression numbers--restricted flow instead of wide open throttle. i've cleaned plenty of carbs that looked...
That sure is a clean lookin clutch--bet you could eat peaches outa that basket. Do you have a missing or weak springs--one of them plungers is...
Never can tell what previous owners might have been doing--or some fat-fingered newbie kid doing his first valve adjustment at a dealer service...
What is the odometer reading? What were the before readings--how far out was it that caused you to want to pull the cams to get to the shims?...
My french ain't so good either--s'il vous plait. After refilling the system you can run the engine to circulate the coolant and push out any...
You would only need #24 for a lever with the bushing if the rest of the assembly is intact, but any machine shop with a lathe could make a brass...
+1^ @ squirrel, they like to leak a little when dried out. Need to make sure the leakin stops before ridin...
The 3rd gens have a vibration around 5k rpm that seems to come out the fuel cap, or you can feel it in the footpegs, etc. There is lots of...
Edit: Additional questions On second thought, Note 6 indicates these are locking bolts do not reuse. The screw diameter is 6mm and the 14...
Limerick is just down the road from Cork and recently beat them in a hurling match...
Now that makes sense i didn't know what that meant before, but now it makes sense that the valves were synched open too far. There once was...
You could get a 10x loupe and inspect all the solder joints looking for cracks in the solder, or just get a hot solder iron and touch up all the...
The 'holes' are the tiny transition ports in the carb throat covered by the lower edge of the big brass butterfly valve. As the throttle is...
i like to use the drill bit trick with 1/4" bits cause they're easier to grab with fat fingers, but i've done the line-it-up-to-the-holes trick...
^+1 @ Toe Cutter.
+1^ on what the squirrel sez, and consider the spade lug terminals as the root of all evil also. Those rolled copper lugs rely on spring...
Launched in 1987 the Honda CBR1000F, also know as the Hurricane, is a sport touring motorcycle manufactured by Honda from 1987 to 1999...
Mississippi--Wouldn't you have a CBR1000 in your garage too?
My Honda Service Manual for the 3rd and 4th gen VFR750F, (p/n 61MT404), indicates coolant capacity is 2.3 liters with overflow tank of 0.3 l, not...
+1^ on what Zen says, except that there is no fuse--power goes thru a big fat red wire from the battery positive to the starter relay to the...
Separate names with a comma.
