The fork tubes are excellent condition, not even scratched. The seals were carefully slid over the tubes with protective plastic wrap to preclude...
Well, that muddies the waters, huh? And, speaking of preload, these forks have some homemade preload spacers installed (thinwall steel pipe) of...
My first thought, too. But I filled it to spec. (6" IIRC), compressed, without springs.
My '90 project was a front end mess of fork oil goo. So, disassembled forks, installed fresh K&L seals, everything went together normally,...
I had a front brake binding on my '90 VFR project, cleaned, inspected, lubed, reinstalled... the pads still bind. So, I removed the really sticky...
Bowl gaskets are generic o-rings (use Viton), 3" x 1/16" or 75mm x 2mm or simply -041. motionindustries.com [ATTACH] BTW, if you use the...
I don't know about the swelling whatcha-ma-callits, but you may have quite a wait there if you're referring to the bowl gaskets. There's a generic...
Well, I get mine at a local motorcycle aftermarket shop, and he gets them from the Parts Unlimited catalog, as I recall. For more money and time,...
Taps, I didn't realize the slides had been modified, 'cause those are OEM needles. I think someone's been playing carb tuner.... Personally, I'd...
Actually in stock??
If no luck on the set you're dealing on, I have a rebuildable set with plenum, very good condition, complete as removed, for $90 shipped CONUS....
PM sent. 12345678910
I need some '90-93 plastic too, if anyone does come up with a lead. I'm looking for the left side main fairings (along side your calf... on your...
60 with three VFRs The age number has little to do with it IMO, more attitude and health. I've owned a total of seven VFRs, currently have three....
Well, no need to go gonzo on the grease. I just smear on a light coating of dielectric grease and they stay just fine. In actuality they stay in...
Sure, the SAE dimensions are 3" x 1/16", which equates to 76mm x 2mm. Again, the standard 0-ring nomenclature is -041. With today's gas, be sure...
I happen to have a Motion Industries store in town, but they have other locations around the country, and probably online availability: Motion...
I just get some generic Viton o-rings, #-041 (I don't have the SAE dimensions off-hand, but can locate them if needed) [IMG] Just don't do this...
I'm good on the airbox. How 'bout a working R/R and horn? Post a pic (or send to joe.nelson (at) ymail.com) of the tail light, if you have.
Thanks for the link and the dyno information -- very interesting. I'll need a few parts! This is a project I recently rescued. I'll be in touch,...
Separate names with a comma.
