Brings up many interesting scenarios, talk about neighbourhood disputes
Ok so let us push a bit deeper, the battery died? how long have you owned this bike? how old was the battery? we see it all the time here people...
Do the Drill, then you will know what is happening with your charging, it seems when the fan kicks in it loads up the motor causing the revs to...
Only thing here is the motor stops doesn't sound like it is dropping onto 2 cylinders which all the above mentioned failures should cause. Could...
I think from reading the original post, the space above is already filled with another elevated car, 14 car spots in 7 spaces
Bumped the kill switch?
If it is cranking over but not firing, remove the top off the air box and give it a squirt of starter fluid, if it attempts to fire you can be...
I'm tipping a spike in the charging, I guess the reason the high beams are ok is because they weren't on when it spiked. Good chance the charging...
Huge effort Anne Marie take it easy and looks like everybody will be on the lookout for you, take care
I would assume the MV had points ignition and sitting with the ignition on and the points closed will cook the coil. I think with these bikes with...
Lint, you have no cat, I'm sure SOW could help out, stuff a couple in the can that should work
Start here read post # 9 you will find out what is wrong http://vfrworld.com/forums/showthread.php/39277-How-to-fix-common-regulator-Stator-failures
Probably the return hole is starting to block in the master cylinder, needs to be flushed out and the hole cleaned
Ok so now I'm tipping the reason those globes were all blown, possible overcharging? better do the "drill"
Squirrel to be fair, the new members joining the "burnt stator club" has dropped off so dramatically over the last 6/9 months I thought that...
I'm only guessing but I think that once the fuel gets above the tap it will then allow fuel to syphon, no different than syphoning fuel out of a...
I have this bookmarked now so I don't have to look for it. Post #9 is the important one...
Do you have rear running lights on high beam?
Not sure, haven't read it but it might help with using a multimeter....
If it is dragging you will only cook the pads
Separate names with a comma.
