Hi Guys, im stuck on this step. Following the manual, it says to install the clutch first --- Done Next I have to install the primary drive gear...
Todays progress. Not show in the pics is some other things I got done, all the shift linkage is back in along with the drive gear and oil pump...
Many Thanks !!
Needles in mine are ok, I built the bike 2 yrs ago and its sat in the shop ever since. I will have to spend some time cleaning epoxy and PC paint...
I figure he will. im sure I have it right, I read it in a few places, but good to triple check
Thanks a lot. Tomorrow Ill mount the swing arm, triple clamps, forks and some other goodies. Maybe even get her back on her wheels. That...
Building it back up, using the new frame. .... [ATTACH] [ATTACH]
Hi guys, I put new OEM O-rings (or D-rings or Seals or what ever they are) on the black coolant pipes for the VF1000R (4 of them). their contour...
Just a simple suggestion, did you try and squirt a bit of fuel down each carb throat to see if you can get her to fart ? Float bowls may be...
Cases are buttoned back up, ill flip it back over when my son's home later today to lend a hand. [ATTACH] [ATTACH]
Nice work ! Looking really good
did a dry run putting the cases together and clicked it through all the gears -- Seems all good Will spend the rest of today cleaning & painting...
Yes, id say so
Well I figured out the mystery. My 2 "spare" VF1000R transmissions are quite different. the one thats different to the bike im working on: -The...
Tranny is repaired. C4 gear swapped for a spare - rounded dogs M4 and M5 swapped for a spare - chipped dogs right side shif fork swapped for a...
Yea, bike was running ok with the exception of the 2nd gear issue. Ill be sure that everything is "clean" in there, thats for sure. Its that...
Well, no luck on finding any nuts that match. been through the parts fiches several times. its a pristine flange nut M8, 12mm socket fit. no...
Thanks, Head nuts are "external" and head bolts/studs "internal" (I think, ill double check though). The external head nuts are chrome Acorn...
yessir ! the nut has me perplexed and worried. I checked my spares and the valve adjuster nuts fit a 10mm socket, this one is 12mm, identical...
here is a birds eye view. given its 200lbs, I decided to work on the floor. the bottom case on the far left is just there to store the 18...
Separate names with a comma.
