Regardless of what you come up with do Squirrels suggestion anyway, just as part of maintenance
Easy fix, get yourself an old Britsih bike and you will never worry about oil leaks again. Sorry if this doesn't help
These 50 year olds are just kids that are still riding
You are not listening, take the bike off the stand and try pushing it in top gear with the plugs out and it skids the rear wheel, the motor is...
How many toes do you have Ducky?
Ok so there is a severe problem there somewhere, disconnect the wire at the starter and try again and see what volts are there now, should get...
Put it in top gear and give it a push, that will tell you if it will turn over
Ok so you are telling me you have 5 volts at the heavy wire at the starter motor, when is this when you push the start button?
Why would you have push started it previously, any reason? What gear are you in when pushing it? Which hot wire are you getting 5 volts at. Pull...
And he has an 1100F, that puts him right up there
And position it so that the air flows through the fins not across them, probably not that critical but if you are relocating it might as well do...
I went to Red Wing Honda out here looking for a stator for my CB about 8 years ago, bloke is on the computer, looks over at me and says " they are...
Grumps you bought a stator from Honda Aust, did you discuss this with the Reserve Bank of Aust before this purchase
Grumps, I mounted mine just above the footpeg but mine is an 86 so the setup would be different. Also I welded a piece of plate in there to mount...
Nice ride up around that area and that is where all those trees up in that area
Yup, thats Australia out there with all those burnt trees in the background, nice pics. Which way did you head north of Albury or south down...
Thanks Jeff, the world must have been craving out for motorcycles back in the eighties, I guess it was around there that a lot of Asian countries...
Just a stab in the dark but I'm wondering if anybody has any idea of Hondas' total bike production per year or any other manufacturer for that...
As Jeff says remove the connector, solder and heatshrink the wires, gets rid of potential failure point, too late afterwards
I did the WD 40 trick on an Enfield interceptor a few years ago and I got some on the dial face. Ended up removing the bezel to clean the face,...
Separate names with a comma.
