You have to look at the external lines going to the heads under the carbs. If they are small black painted aluminum tubes that come from above...
What is this world coming to where Matt is the voice of reason? We are in a sad state of affairs my friends.....
You'll need to pull the cam(s). Bear in mind that I'm not sure if the rockers are available anymore from Honda. Parts availability is a problem....
That's the dreaded top end issue. Keep in mind that the cam lobe is actually the second thing to go - the rocker is the first. If you pull the...
See e-mail!
A metric ruler is fine. They are made to an even millimeter number, all you need is something that can measure in mm. That tells me the...
Did you measure the spacers and check to make sure they are not damaged? Where is the caliper bracket rubbing? Is the caliper bracket still...
Welcome! I think you'll find the 700 to be a pretty sweet bike.
Correct. In order starting from the sprocket side: - 10mm spacer - Modified VF500 sprocket carrier - CBRF2 wheel with VF500 bearings - 8mm...
Right! That's why I said I was surprised and it lead me to wonder if you were tightening your axle nut enough.
When you torque the axle nut to the proper value it will try to clamp the bracket straight. If it can't get straight it will cause a bind against...
The size of the wheel is one part, but also the CBR tire is a lower profile. Those two combine to give about a 10-12mm lower axle to ground...
Yeah, I'd say it sounds like carbs for sure. Pulling the plugs would tell you if it's just one cylinder. If you had something go wrong with just...
WOW! It was pretty darn nice to begin with. I love the RWB scheme - that's timeless!
Yes, as mentioned proper carb synch must be done with the carbs on the engine. You need to sych them every time they are removed. A bench synch...
You don't want to make front end changes to adjust for the rear - you want to address the rear with the rear. By that I mean you would want to...
Correct, the rear wheel does not need to be removed to install the shock.
I'm 215lb and it's WAY overdamped. I mean like double what it should be. The spring rate in the forks is ok for my weight but the stock rear was...
Separate names with a comma.
