Friction discs are a wear item, I replaced mine at 55000 miles because the clutch was getting grabby. For a set of EBC discs and springs I paid...
I looked again at the photos, and you are quite right, the piece being held in the first photo is the bolt plus the broken off post from the...
Shoot the Cat! I think you got lucky there to have pulled the clutch cover off as soon as you did. The thought of a loose bolt head rattling...
Looks pretty similar to the results of my horizontal ride last year Stuka. Twas no biggie to fix, Chinese fairings and other eBay stuff, a few new...
Yes its not logical but it is true. The flapper is closed in gear below 5500 rpm and open above that. Also it is open any time the bike is in...
I read somewhere that if you want to find out who loves you the most, lock your wife and your dog out of the house for a couple of hours, then...
Having re-read your original post I think Mr Hackaweek is correct about the fault being primarily electrical. Given the bike runs better with the...
Right below the oil filler is the clutch, and it is not unusual and fairly normal to get some rattle from that at idle. Listen again with the...
I'd start with a proper carb clean, there's no way the brakes should have anything to do with the carbs. You are going to need to pull them off...
AM you could also try some Barrier Cream, your local protective clothing/safety gear shop should stock that. Pretty commonly used by people...
Maybe K&N could use the picture for promotional purposes? [IMG]
Round here, that counts as sacrilege! (I always wear ear plugs, but don't tell anyone).
Is this what happens when you go cold turkey without a Timmies stop?
I bought a used ST1100, and after my VTR1000 and VFR800 it feels heavy and unresponsive! Still nice to ride however, and actually not slow or...
Happy to have helped. It was the first thing I repaired on my own VFR800 two years ago.
From the symptoms maybe the tank vent is not breathing easily so the bike is starving for fuel when it's drinking lots accelerating, or maybe the...
I'd be checking over the chain and sprockets carefully first. Maybe you have a bolt coming loose or need to replace the chain and sprockets, or...
You do need to leave a few very dark corners so small parts can fly off and hide as required.
There's no speedo sensor on the front. The speedo sensor is located on the sprocket cover, held in place by a couple of 8mm bolts from memory....
Beer fridge! Storage cabinet for all the chemicals paints etc. Hooks for hanging removed bodywork Air compressor and airline Impact gun Work...
Separate names with a comma.
