Probably easiest would be to use a vacuum bleeder on the clutch slave nipple and suck fluid down from the master. It sounds like you have an air...
Or how quickly?
You will need a fuel pump suitable for fuel injection from memory the pressure is 250 kPa. There are also relays for the fuel pump, and a bank...
Anything that slows/prevents corrosion in connectors sounds like a great idea to me. Based on recent personal experience getting my ST1100 back on...
51 N-m or 38 ft-lb is specified in the service manual. [IMG]
This might be a dumb question Jeff, but if you had the wheel up on the balancer, why not stick a conventional sticky lead weight on? I have read...
Keep that motor running! Great view. Sent from my iPhone using Tapatalk
Jeff and GT750, hats off to you guys for helping a sister out. It sounds like Anne-Marie is back on the road but the problem is unresolved?...
I own a 1999 VFR (practically the same as 2001), also a 1997 VTR1000 and recently a 1992 ST1100. All of these bikes have quite high mileage and...
I looked at the service manual and the fuel gauge and the low fuel light are two separate systems, so entirely possible for the gauge and low fuel...
I can't help identify the wires, it's been many years since I owned one of these. However I have a couple of suggestions for you. The only...
Nah mate, the silver matches my hair!
Isn't it grand to be able to get the toys that you want now?[IMG]
Here's a link to an RC36 manual if you need it: https://www.dropbox.com/s/lkc7dmwyi509h0b/vfr750f%20RC36%20service.pdf?dl=0
You could look up the part number eg Partzilla and see if is common to both models. I would guess that it will be the same. Sent from my iPhone...
Billy I would have thought that if you just file off any high spots and polish up with fine sandpaper, you could use a cold metal filler in any...
Check for debris stuck in the fan blade/shroud. You should be able to freely spin the fan by hand. It's not unusual for grass or other objects to...
The tube I have is Marley electrical conduit with 43mm id and 50mm od. [IMG] If you are absolutely unable to find some pipe you can tap the new...
I just push down on the fork cap with a socket and ratchet driver. As Norcal says, there isn't a huge amount of spring tension in the fork....
This might just be the flapper valve solenoid; when the clutch switch gets a little dirty and makes intermittent contact, the solenoid can make...
Separate names with a comma.
