I need to add an "Insane Mode" button to my VFR (if only for bragging rights). Thanks for sharing the link, Duccman.
Guten tag, Chris. As a fellow RC46 owner that I bought two years ago with 70,000km on it (now 94,000km), there's lots of things that you can do,...
I've never heard of motorcycle brake lines bursting, so I would not worry about that part. In my experience rubber lines do become more flexible...
Sounds like a sensible start. For your next purchase Chris, buy a torque wrench and look up the correct values for your plugs and drain plug. A...
Good job aiming for the car's crumple zone, Ghandi! Looks like you had a soft (-ish) crash so maybe the damage is limited to the brake rotor. I...
Sorry Billy. Is this better / less arousing? [IMG]
Yes us Kiwi's are quite partial to our Ventura racks. There's no truth to the rumour that they're compulsory for all NZ registered bike however....
Sounds like your VF750F has a mind of it's own, and wanted to go for a longer/faster ride after too long trapped in a wood shed! The hydraulic...
[IMG] I managed to get the removal pin jammed in the old chain, and bend the tool frame at the same time. I did not follow the instruction which...
I have used motor-stickers.com twice last year, and been very happy both times. I think they are located in Poland, but I had no communication...
Manny if you don't already have it, the 5th gen service manual is here:...
A stuck clutch won't stop the gearbox shifting. If it won't shift out of fifth, there's some gearbox damage. At the easiest that could be a...
Manny, sorry for the dumb question, but are you actually referring to the FI light? That will do a morse-code type pattern to indicate any faulty...
It's a good thing this a mostly US based forum. Our friends in the UK have a whole other meaning for "dogging", that also can involve shuddering,...
The V4 engine has an uneven firing order (which is what makes them so awesome) but they don't like to run much under 3k rpm under load. So keep...
It does sound like you've found your culprit, and it lives in the fuel tank. I'd be pulling the pump and filter assembly out to look for a...
Some great tips above! Grind the head off the old rivets before you attempt to push them out (or just chop through the chain with an angle...
A binding calliper seal might cause drag but I don't think it would prevent the pads releasing, so I would vote for a blockage in the return...
I use short, cheap chinese levers from eBay. Two fingers on the brake is more than enough, and I don't do traffic, so the clutch pull is no bother...
There are starter valves, and then there's the wax unit. The starter valves are basically small air bleeds that bypass the throttle butterflies....
Separate names with a comma.
