There's no crush washers, and the bolts should be fine to re-use (they're under very light torque, into aluminium. Make sure you buy a new clutch...
I agree, the engine is definitely in residence. I can see the front and rear camcovers, the sprocket cover, the exhaust manifold and as Tink...
I'm with Norm on this. Either both front blinker bulbs have died, or there is an electrical gremlin in their circuit. Given both have stopped, I...
[IMG] Sadly I also share this space with my daughter's car, but I have got room for two bikes, a workbench, storage cupboards, beer fridge, a...
Brian, its good to see that you remembered the red wine and salmon, no decent maintenance session should be without those.
We never had that particular model available new locally, but we did get the CBX750F with similar chassis and engine, and I bought one new back in...
I faced that same puzzle reassembling my bike a few months back. All four funnels are identical, so it does not matter which way around they are...
That drain hole will let out any liquid that accumulates in the V. If you pour some water in there you'll probably flush out a heap of green dye...
If you hear the fuel pump priming when you turn the key on, and the lights are on, then you have battery voltage and live fuses. If the bike was...
Kizer (or should that be Verbal?) Earlier on you said: I'm getting NO voltage to the battery. By my reading of your tests, I think it is likely...
If we're thinking about lightening Brian's bike, I'd also suggest making sure that the 1.5 gallons of gas is unleaded. You don't want any of that...
Gently shuddering after shifting to 2nd? That doesn't sound good. Assuming this is not fuelling related, then I'd have guessed that a shudder...
Hi Lars here's some links to downloads for the owners manual and service manual. The service manual does have lots of specification data (STARTING...
Corrected for the Northern Hemisphere viewers.... [IMG]
I agree with Knight's suggestion about the starter valves, but the engine must be running steadily to do that, which sounds like Catch #22. It is...
The clutch is an area that I would not have considered working on, if I didn't regularly also ride my VTR1000. That bike has similar mileage to my...
Just old age in my case. 93000km. Sent from my iPhone using Tapatalk
I think all clutch packs are the same; the first fibre disc has to fit over the anti-judder ring and so has a bigger id. I was amazed how easy...
The only special tool needed to remove the clutch cover is a rubber mallet which is very handy to persuade the old gasket to let go. I just...
I decided that it was time for some fresh clutch plates. I ordered a set of EBC plates and updated springs, along with a gasket, from Partzilla....
Separate names with a comma.
